Model I100N50X4
ROHS
Compliant
Flange Mount Termination
100 Watts, 50Ω
Description
The I100N50X4 is high performance Aluminum Nitride (AlN) flange mount
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators, and for use in power
combiners. The termination is also RoHS compliant!
General Specifications
Resistive Element
Substrate
Thick Film
AlN Ceramic
Alumina Ceramic
Features:
Cover
• RoHS Compliant
• 100 Watts
Tolerance is 0.010”, unless otherwise specified. Designed to meet of exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
• DC – 3.0 GHz
• AlN Ceramic
Resistance Value:
Power:
50 Ohms, 2%
100 Watts
• Non-Nichrome Resistive
Element
Frequency Range:
V.S.W.R.
DC – 3.0GHz
1.25 : 1
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Storage temperature is -20°C to 85 ºC . Operating
temperature is -55ºC to 125ºC (see chart for derating temperatures). Specifications
subject to change with out notice.
• Low VSWR
• 100% Tested
Outline Drawing
Note: All dimensions in inches – 1inch = 2.54cm. Lead Length: 0.150in min.
I100N50X4 (097) Rev D.
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Europe: