Agilent HCPL-5150 & HCPL-5151
DSCC SMD 5962-04205
0.5 Amp Output Current IGBT
Gate Drive Optocoupler
Data Sheet
MIL-PRF-38534 certified line
and are included in the DSCC
Qualified Manufacturers List,
QML-38534 for Hybrid
Microcircuits.
Features
• Performance Guaranteed over Full
Military Temperature Range:
-55°C to +125°C
Description
The HCPL-5150 contains a
GaAsP LED optically coupled to
an integrated circuit with a
power output stage. The device
is ideally suited for driving
power IGBTs and MOSFETs
used in motor control inverter
applications. The high
• Manufactured and Tested on a MIL-
PRF-38534 Certified Line
Schematic Diagram
• Hermetically Sealed Packages
1
8
V
CC
N/ C
ANODE
CATHODE
N/ C
• Dual Marked with Device Part
Number and DSCC Drawing
Number
V
2
3
4
7
6
5
O
• QML-38534
operating voltage range of the
output stage provides the drive
voltages required by gate
V
O
• HCPL-3150 Function Compatibility
• 0.5 A Minimum Peak Output Current
• 10 kV/ µs Minimum Common Mode
V
EE
SHIELD
controlled devices. The voltage
and current supplied by this
optocoupler makes it ideally
suited for directly driving IGBTs
with ratings up to 1200 V/50 A.
For IGBTs with higher ratings,
the HCPL-5150 can be used to
drive a discrete power stage,
which drives the IGBT gate.
Rejection (CMR) at V = 1000 V
CM
Applications
• 1.0 V Maximum Low Level Output
Voltage (V ) Eliminates Need for
Negative Gate Drive
• Industrial and Military
Environments
OL
• High Reliability Systems
• I = 5 mA Maximum Supply
CC
Current
• Harsh Industrial Environments
• Under Voltage Lock-Out Protection
(UVLO) with Hysteresis
• Transportation, Medical, and Life
Critical Systems
The products are capable of
operation and storage over the
full military temperature range
and can be purchased as either
commercial product, with full
MIL-PRF-38534 Class H testing,
or from Defense Supply Center
Columbus (DSCC) Standard
Microcircuit Drawing (SMD)
5962-04205. All devices are
manufactured and tested on a
• Wide Operating V Range: 15 to 30
CC
• Isolated IGBT/ MOSFET Gate Drive
• AC and Brushless DC Motor Drives
• Industrial Inverters
Volts
• 500 ns Maximum Propagation Delay
• +/ - 0.35 µs Maximum Delay
Between Devices
• Switch Mode Power Supplies
(SMPS)
• Uninterruptible Power Supplies
(UPS)
CAUTION: It is advised that normal static precautions be taken in handling and assembly of
this component to prevent damage and/or degradation which may be induced by ESD.