Agilent 33250A
Function/Arbitrary
Waveform Generator
Data Sheet
• 80 MHz sine and square wave outputs
• Sine, square, ramp, noise and other
waveforms
• 50 MHz pulse waveforms with variable
rise/fall times
• 12-bit, 200 MSa/s, 64K-point deep arbi-
trary waveform
Built-in Versatility
AM, FM and FSK capabilities make it easy
to modulate waveforms with or without
a separate source. Linear or logarith-
mic sweeps can be performed with a
programmable frequency marker signal.
Programmable burst count and gating allow
you to further customize your signal.
Standard Waveforms
The included Agilent IntuiLink software
allows you to easily create, edit, and down-
load complex waveforms using the IntuiLink
Arbitrary Waveform Editor. Or you can capture
a waveform using IntuiLink oscilloscope or
DMM and send it to the 33250A for output.
For programmers, ActiveX components can
be used to control the instrument using
SCPI commands. IntuiLink provides the
tools to easily create, download, and man-
age waveforms for your 33250A. To find out
more about IntuiLink, visit www.agilent.
com/find/intuilink.
For system applications, both GPIB and
RS-232 interfaces are standard, and support
full programmability using SCPI commands.
The Agilent Technologies 33250A Function/
Arbitrary Waveform Generator uses direct
digital-synthesis techniques to create a sta-
ble, accurate output on all waveforms, down
to 1 µHz frequency resolution. The benefits
are apparent in every signal you produce,
from the sine wave frequency accuracy to the
fast rise/fall times of square waves, to the
ramp linearity.
Color Graphical Display
The unique design of the 33250A combines
a low-profile instrument with the benefits
of a color graphical display. Now you can
display multiple waveform parameters at
the same time. The graphical interface also
allows you to modify arbitrary waveforms
quickly and easily.
Front-panel operation of the 33250A is
straightforward and user friendly. The knob
or numeric keypad can be used to adjust fre-
quency, amplitude and offset. You can even
enter voltage values directly in Vpp, Vrms,
dBm, or high/low levels. Timing parameters
can be entered in hertz (Hz) or seconds.
Pulse Generation
Timebase Stability and Clock Reference
The 33250A can generate simple pulses
up to 50 MHz. With variable edge time,
pulse width and voltage level, the 33250A
is ideally suited to a wide variety of pulse
applications.
The 33250A TCXO timebase gives you
frequency accuracy of 2 ppm for your most
demanding applications. The external clock
reference input/output lets you synchronize
to an external 10 MHz clock, to another
33250A, or to another Agilent 332XXA
Function/Arbitrary Wafeform Generator.
Phase adjustments can be made from the
front panel or via a computer interface,
allowing precise phase calibration
Custom Waveform Generation
Why settle for a basic function generator
when you can get arbitrary waveforms at
no extra cost? With the 33250A, you can
generate arbitrary waveforms with 12-bit
vertical resolution, 64K memory depth,
and a sample rate of 200 MSa/s. You can
also store up to four 64K-deep arbitrary
waveforms in non-volatile memory with
user-defined names to help you find the right
waveform when you need it most.
and adjustment.
5秒后页面跳转
MAX487芯片引脚图及功能、应用领域详解
IR2110驱动芯片引脚图及功能、电路图详解
74LS74是什么芯片 74LS74引脚图及功能表
CD4511芯片引脚图及功能、电路图解析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
