Agilent 1GC1-8235
0-20 GHz Integrated Diode Limiter
TC231P
Data Sheet
Features
• Two Independent Limiters for
Single–ended or Differential
Signals
• Can be Biased for Adjustable Limit
Level and Signal Detection
• Minimum Group Delay.
Package Type:
3 x 3 mm MLF-16/QFN-16
Package Dimensions:
Package Thickness:
Pad (lead) Pitch:
Pad (lead) Width:
3 x 3 mm (118 x 118 mils)
0.90 mm (35 mils)
0.5 mm (20 mils)
0.20 mm (8 mils)
1
Absolute maximum ratings
Symbol
Parameters/conditions
Min
Max
Units
Pin
Continuous RF Power
A &C Grounded
DGND Grounded
+17
+19
dBm
IBIAS
Continuous Forward Current into A1,A2,C1,C2,
DGND1-4
36
mA
Description
VBIAS
Vrev
Ifwd
Vin
Voltage at A1,A2,C1,C2, DGND1-4
Reverse Bias Voltage on Each Diode
Forward Bias Current on Each Diode
Voltage at IN1, IN2, OUT1,OUT2
Current at IN1, IN2, OUT1,OUT2
Ambient Temperature
-5
+5
8
V
The TC231 is a 20 GHz integrated diode
limiter that can be used to protect
sensitive RF circuits from excess RF
power, DC transients, and ESD. Two
limiters are provided on–chip to enable
single–ended or differential use.
V
36
5
mA
V
+5
IIN
–80
80
+85
240
165
mA
ºC
ºC
ºC
The TC231 can be used as an unbiased
10 or 18 dBm passive limiter; it also
provides adjustable limiting and peak
power detection capabilities.
TA
Tmax
Maximum Assembly Temperature
Storage Temperature
Tstg
-65
The TC231 has been designed for
minimal insertion loss. Group delay
characteristics have been optimized to
allow use in millimeter–wave analog
and gigabit digital designs..
Notes:
1
Operation in excess of any one of these ratings may result in permanent damage to this device. For normal
operation, all combined bias and thermal conditions should be chosen such that the maximum junction
temperature (TJ) is not exceeded. TA = 25°C except for Top, Tst, and Tmax
Sixty-second maximum
.
2