Low Power Audio Codec
SSM2604
FEATURES
GENERAL DESCRIPTION
Stereo, 24-bit analog-to-digital and digital-to-analog converters
DAC SNR: 100 dB (A-weighted), THD: −80 dB at 48 kHz, 3.3 V
ADC SNR: 90 dB (A-weighted), THD: −80 dB at 48 kHz, 3.3 V
Stereo line inputs
The SSM2604 is a low power, high quality stereo audio codec
for portable digital audio applications with one set of stereo
programmable gain amplifier (PGA) line inputs. It features two
24-bit analog-to-digital converter (ADC) channels and two
24-bit digital-to-analog (DAC) converter channels.
Low power
7 mW stereo playback (1.8 V/1.5 V supplies)
14 mW record and playback (1.8 V/1.5 V supplies)
Low supply voltages
Analog: 1.8 V to 3.6 V
Digital: 1.5 V to 3.6 V
256/384 oversampling rate in normal mode;
250/272 oversampling rate in USB mode
Audio sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz,
22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz,
and 96 kHz
The SSM2604 can operate as a master or a slave. It supports
various master clock frequencies, including 12 MHz or 24 MHz
for USB devices; standard 256 fS or 384 fS based rates, such as
12.288 MHz and 24.576 MHz; and many common audio sam-
pling rates, such as 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz, 32 kHz,
24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025 kHz, and 8 kHz.
The SSM2604 can operate at power supplies as low as 1.8 V for
the analog circuitry and as low as 1.5 V for the digital circuitry.
The maximum voltage supply is 3.6 V for all supplies.
20-lead, 4 mm × 4 mm LFCSP (QFN) package
The SSM2604 is specified over the industrial temperature range
of −40°C to +85°C. It is available in a 20-lead, 4 mm × 4 mm
lead frame chip scale package (LFCSP).
APPLICATIONS
Mobile phones
MP3 players
Portable gaming
Portable electronics
Educational toys
FUNCTIONAL BLOCK DIAGRAM
AVDD VMID AGND
DVDD DGND
SSM2604
BYPASS
–34.5dB TO +33dB,
1.5dB STEP
ADC
DAC
RLINEIN
LLINEIN
ROUT
DIGITAL
PROCESSOR
ADC
DAC
LOUT
–34.5dB TO +33dB,
1.5dB STEP
BYPASS
CLK
DIGITAL AUDIO INTERFACE
CONTROL INTERFACE
MCLK/ XTO CLKOUT
XTI
PBDAT RECDAT BCLK PBLRC RECLRC SDIN
SCLK
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2008 Analog Devices, Inc. All rights reserved.