5秒后页面跳转
ADuC7023BCPZ62I-RL PDF预览

ADuC7023BCPZ62I-RL

更新时间: 2024-02-16 11:23:22
品牌 Logo 应用领域
亚德诺 - ADI 微控制器
页数 文件大小 规格书
96页 1473K
描述
Precision Analog Microcontroller, 12-Bit Analog I/O, ARM7TDMI MCU with Enhanced IRQ Handler

ADuC7023BCPZ62I-RL 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:QFN
包装说明:HVQCCN, LCC32,.2SQ,20针数:32
Reach Compliance Code:compliantECCN代码:3A991.A.2
HTS代码:8542.31.00.01风险等级:5.25
具有ADC:YES地址总线宽度:
位大小:32CPU系列:ARM7
最大时钟频率:44 MHzDAC 通道:YES
DMA 通道:NO外部数据总线宽度:
JESD-30 代码:S-XQCC-N32JESD-609代码:e3
长度:5 mm湿度敏感等级:1
I/O 线路数量:12端子数量:32
最高工作温度:125 °C最低工作温度:-40 °C
PWM 通道:YES封装主体材料:UNSPECIFIED
封装代码:HVQCCN封装等效代码:LCC32,.2SQ,20
封装形状:SQUARE封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
峰值回流温度(摄氏度):260电源:3/3.3 V
认证状态:Not QualifiedRAM(字节):8192
ROM(单词):63488ROM可编程性:FLASH
座面最大高度:0.8 mm速度:41.78 MHz
子类别:Microcontrollers最大压摆率:35 mA
最大供电电压:3.6 V最小供电电压:2.7 V
标称供电电压:3 V表面贴装:YES
技术:CMOS温度等级:AUTOMOTIVE
端子面层:Matte Tin (Sn)端子形式:NO LEAD
端子节距:0.5 mm端子位置:QUAD
处于峰值回流温度下的最长时间:30宽度:5 mm
uPs/uCs/外围集成电路类型:MICROCONTROLLER, RISCBase Number Matches:1

ADuC7023BCPZ62I-RL 数据手册

 浏览型号ADuC7023BCPZ62I-RL的Datasheet PDF文件第2页浏览型号ADuC7023BCPZ62I-RL的Datasheet PDF文件第3页浏览型号ADuC7023BCPZ62I-RL的Datasheet PDF文件第4页浏览型号ADuC7023BCPZ62I-RL的Datasheet PDF文件第5页浏览型号ADuC7023BCPZ62I-RL的Datasheet PDF文件第6页浏览型号ADuC7023BCPZ62I-RL的Datasheet PDF文件第7页 
Precision Analog Microcontroller, 12-Bit Analog  
I/O, ARM7TDMI MCU with Enhanced IRQ Handler  
Data Sheet  
ADuC7023  
FEATURES  
APPLICATIONS  
Analog I/O  
Optical networking  
Multichannel, 12-bit, 1 MSPS ADC  
Up to 12 ADC channels  
Fully differential and single-ended modes  
0 V to VREF analog input range  
12-bit voltage output DACs  
4 DAC outputs available  
On-chip voltage reference  
On-chip temperature sensor  
Voltage comparator  
Microcontroller  
Industrial control and automation systems  
Smart sensors, precision instrumentation  
Base station systems  
GENERAL DESCRIPTION  
The ADuC7023 is a fully integrated, 1 MSPS, 12-bit data  
acquisition system, incorporating high performance multichannel  
ADCs, 16-bit/32-bit MCUs, and Flash/EE memory on a single chip.  
The ADC consists of up to 12 single-ended inputs. An additional four  
inputs are available but are multiplexed with the four DAC output  
pins. The ADC can operate in single-ended or differential input modes.  
The ADC input voltage is 0 V to VREF. A low drift band gap reference,  
temperature sensor, and voltage comparator complete the ADC  
peripheral set.  
ARM7TDMI core, 16-bit/32-bit RISC architecture  
JTAG port supports code download and debug  
Clocking options  
Trimmed on-chip oscillator ( 3ꢀ%  
External watch crystal  
External clock source up to 44 MHz  
41.78 MHz PLL with programmable divider  
Memory  
62 kB Flash/EE memory, 8 kB SRAM  
In-circuit download, JTAG-based debug  
Software-triggered in-circuit reprogrammability  
Vectored interrupt controller for FIQ and IRQ  
8 priority levels for each interrupt type  
Interrupt on edge or level external pin inputs  
On-chip peripherals  
2× fully I2C-compatible channels  
SPI (20 Mbps in master mode, 10 Mbps in slave mode%  
With 4-byte FIFO on input and output stages  
Up to 20 GPIO pins—Digital only GPIOs are 5 V tolerant  
3× general-purpose timers  
Watchdog timer (WDT%  
Programmable logic array (PLA%  
16 PLA elements  
The DAC output range is programmable to one of two voltage ranges.  
The DAC outputs have an enhanced feature of being able to retain  
their output voltage during a watchdog or software reset sequence.  
The devices operate from an on-chip oscillator and a PLL,  
generating an internal high frequency clock of 41.78 MHz. This  
clock is routed through a programmable clock divider from which  
the MCU core clock operating frequency is generated. The  
microcontroller core is an ARM7TDMI®, 16-bit/32-bit RISC  
machine that offers up to 41 MIPS peak performance. Eight  
kilobytes of SRAM and 62 kilobytes of nonvolatile Flash/EE  
memory are provided on chip. The ARM7TDMI core views all  
memory and registers as a single linear array.  
The ADuC7023 contains an advanced interrupt controller. The  
vectored interrupt controller (VIC) allows every interrupt to be  
assigned a priority level. It also supports nested interrupts to a  
maximum level of eight per IRQ and FIQ. When IRQ and FIQ  
interrupt sources are combined, a total of 16 nested interrupt levels  
are supported.  
On-chip factory firmware supports in-circuit download via the I2C  
serial interface port, and nonintrusive emulation is supported via  
the JTAG interface. These features are incorporated into a low cost  
QuickStart™ development system supporting this MicroConverter®  
family. The part contains a 16-bit PWM with five output signals.  
16-bit, 5-channel PWM  
Power  
Specified for 3 V operation  
Active mode: 11 mA at 5 MHz, 28 mA at 41.78 MHz  
Packages and temperature range  
32-lead 5 mm × 5 mm LFCSP  
40-lead LFCSP  
For communication purposes, the part contains 2 × I2C channels that  
can be individually configured for master or slave mode. An SPI  
interface supporting both master and slave modes is also provided.  
36-Lead WLCSP  
The parts operate from 2.7 V to 3.6 V and are specified over an  
industrial temperature range of −40°C to +125°C. e ADuC7023 is  
available in either a 32-lead or 40-lead LFCSP package. A 36-ball  
wafer level CSP package (WLCSP) is also available.  
Fully specified for −40°C to +125°C operation  
Tools  
Low cost QuickStart development system  
Full third-party support  
Rev. E  
Document Feedback  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700 ©2010–2013 Analog Devices, Inc. All rights reserved.  
Technical Support  
www.analog.com  
 
 
 

与ADuC7023BCPZ62I-RL相关器件

型号 品牌 描述 获取价格 数据表
ADUC7024 ADI Precision Analog Microcontroller 12-bit Analog I/O, ARM7TDMI MCU

获取价格

ADUC7024_15 ADI Precision Analog Microcontroller, 12-Bit Analog I/O, ARM7TDMI MCU

获取价格

ADUC7024BCP ADI IC 32-BIT, FLASH, 45.5 MHz, RISC MICROCONTROLLER, QCC64, 9 X 9 MM, MO-220-VMMD, LFCSP-64,

获取价格

ADUC7024BCP62 ADI Precision Analog Microcontroller 12-bit Analog I/O, ARM7TDMI MCU

获取价格

ADuC7024BCPZ62 ADI Precision Analog Microcontroller, 12-Bit Analog I/O, ARM7TDMI MCU

获取价格

ADuC7024BCPZ62I ADI Precision Analog Microcontroller, 12-Bit Analog I/O, ARM7TDMI MCU

获取价格