5秒后页面跳转
捷配首页

Datasheet > 放大器电路 > 比较器> ADCMP606BKSZ-RL
ADCMP606BKSZ-RL PDF预览

ADCMP606BKSZ-RL

更新时间： 2024-01-14 18:08:30
品牌 Logo 应用领域
亚德诺 - ADI 比较器放大器放大器电路光电二极管
页数 文件大小 规格书
16页 355K
描述
Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply CML Comparators

阅读下载

获取价格

ADCMP606BKSZ-RL 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Obsolete零件包装代码：TSSOP
包装说明：ROHS COMPLIANT, MO-203AB, SC-70, 6 PIN针数：6
Reach Compliance Code：unknownECCN代码：EAR99
HTS代码：8542.39.00.01风险等级：5.61
放大器类型：COMPARATOR最大平均偏置电流 (IIB)：5 µA
25C 时的最大偏置电流 (IIB)：5 µA最大输入失调电压：5000 µV
JESD-30 代码：R-PDSO-G6JESD-609代码：e4
长度：2 mm湿度敏感等级：1
功能数量：1端子数量：6
最高工作温度：125 °C最低工作温度：-40 °C
封装主体材料：PLASTIC/EPOXY封装代码：TSSOP
封装等效代码：TSSOP6,.08封装形状：RECTANGULAR
封装形式：SMALL OUTLINE, THIN PROFILE, SHRINK PITCH峰值回流温度（摄氏度）：260
电源：3/5 V认证状态：Not Qualified
标称响应时间：2.1 ns座面最大高度：1.1 mm
子类别：Comparator最大压摆率：26 mA
供电电压上限：6 V标称供电电压 (Vsup)：2.5 V
表面贴装：YES技术：BIPOLAR
温度等级：AUTOMOTIVE端子面层：Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式：GULL WING端子节距：0.65 mm
端子位置：DUAL处于峰值回流温度下的最长时间：40
宽度：1.25 mmBase Number Matches：1

ADCMP606BKSZ-RL 数据手册

 浏览型号ADCMP606BKSZ-RL的Datasheet PDF文件第2页浏览型号ADCMP606BKSZ-RL的Datasheet PDF文件第3页浏览型号ADCMP606BKSZ-RL的Datasheet PDF文件第4页浏览型号ADCMP606BKSZ-RL的Datasheet PDF文件第5页浏览型号ADCMP606BKSZ-RL的Datasheet PDF文件第6页浏览型号ADCMP606BKSZ-RL的Datasheet PDF文件第7页 
Rail-to-Rail, Very Fast, 2.5 V to 5.5 V,  
Single-Supply CML Comparators  
ADCMP606/ADCMP607  
FEATURES  
FUNCTIONAL BLOCK DIAGRAM  
V
CCO  
(ADCMP607 ONLY)  
Fully specified rail to rail at VCC = 2.5 V to 5.5 V  
Input common-mode voltage from −0.2 V to VCC + 0.2 V  
CML-compatible output stage  
1.25 ns propagation delay  
50 mW @ 2.5V VCC  
Shutdown pin  
V
CCI  
V
NONINVERTING  
INPUT  
P
Q OUTPUT  
Q OUTPUT  
CML  
ADCMP606/  
ADCMP607  
Single-pin control for programmable hysteresis and latch  
(ADCMP607 only)  
V
INVERTING  
INPUT  
N
Power supply rejection > 60 dB  
−40°C to +125°C operation  
LE/HYS INPUT (ADCMP607 ONLY)  
INPUT (ADCMP607 ONLY)  
S
DN  
APPLICATIONS  
Figure 1.  
High speed instrumentation  
Clock and data signal restoration  
Logic level shifting or translation  
Pulse spectroscopy  
High speed line receivers  
Threshold detection  
Peak and zero-crossing detectors  
High speed trigger circuitry  
Pulse-width modulators  
Current-/voltage-controlled oscillators  
Automatic test equipment (ATE)  
GENERAL DESCRIPTION  
to +5.7 V input signal range. The ADCMP607 features split  
input/output supplies with no sequencing restrictions to  
support a wide input signal range with independent output  
swing control and power savings.  
The ADCMP606 and ADCMP607 are very fast comparators  
fabricated on XFCB2, an Analog Devices, Inc. proprietary  
process. These comparators are exceptionally versatile and easy  
to use. Features include an input range from VEE − 0.5 V to  
V
CC + 0.2 V, low noise, CML-compatible output drivers, and  
The CML-compatible output stage is fully back-matched for  
superior performance. The comparator input stage offers robust  
protection against large input overdrive, and the outputs do not  
phase reverse when the valid input signal range is exceeded. On  
the ADCMP607, latch and programmable hysteresis features are  
also provided with a unique single-pin control option.  
TTL-/CMOS-compatible latch inputs with adjustable hysteresis  
and/or shutdown inputs.  
The devices offer 1.25 ns propagation delay with 2.5 ps rms  
random jitter (RJ). Overdrive and slew rate dispersion are  
typically less than 50 ps.  
The ADCMP606 is available in a 6-lead SC70 package and the  
ADCMP607 is available in a 12-lead LFCSP package.  
A flexible power supply scheme allows the devices to operate  
with a single +2.5 V positive supply and a −0.5 V to +2.7 V  
input signal range up to a +5.5 V positive supply with a −0.5 V  
Rev. 0  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2006 Analog Devices, Inc. All rights reserved.  
1234567...16

下载PDF

与ADCMP606BKSZ-RL相关器件

型号 品牌 描述 获取价格 数据表
ADCMP607 ADI Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply CML Comparators

获取价格
ADCMP607_15 ADI Rail-to-Rail, Very Fast, 2.5 V to 5.5 V

获取价格
ADCMP607BCPZ-R2 ADI Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply CML Comparators

获取价格
ADCMP607BCPZ-R7 ADI Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply CML Comparators

获取价格
ADCMP607BCPZ-WP ADI Rail-to-Rail, Very Fast, 2.5 V to 5.5 V, Single-Supply CML Comparators

获取价格
ADCMP608 ADI Rail-to-Rail, Fast, Low Power, 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparators

获取价格

与ADCMP606BKSZ-RL相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证