5秒后页面跳转
ADATE209 PDF预览

ADATE209

更新时间: 2024-01-16 13:38:48
品牌 Logo 应用领域
亚德诺 - ADI 驱动
页数 文件大小 规格书
16页 784K
描述
4.0 Gbps Dual Driver

ADATE209 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:BGA
包装说明:LBGA, BGA49,7X7,40针数:49
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.66
接口集成电路类型:BUFFER OR INVERTER BASED PERIPHERAL DRIVERJESD-30 代码:S-PBGA-B49
长度:8 mm湿度敏感等级:3
标称负供电电压:-4.5 V功能数量:2
端子数量:49最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:LBGA封装等效代码:BGA49,7X7,40
封装形状:SQUARE封装形式:GRID ARRAY, LOW PROFILE
峰值回流温度(摄氏度):260电源:-4.5,7 V
认证状态:Not Qualified座面最大高度:1.6 mm
子类别:Other Interface ICs最大供电电压:7.35 V
最小供电电压:6.65 V标称供电电压:7 V
表面贴装:YES温度等级:INDUSTRIAL
端子形式:BALL端子节距:1 mm
端子位置:BOTTOM处于峰值回流温度下的最长时间:40
宽度:8 mmBase Number Matches:1

ADATE209 数据手册

 浏览型号ADATE209的Datasheet PDF文件第2页浏览型号ADATE209的Datasheet PDF文件第3页浏览型号ADATE209的Datasheet PDF文件第4页浏览型号ADATE209的Datasheet PDF文件第5页浏览型号ADATE209的Datasheet PDF文件第6页浏览型号ADATE209的Datasheet PDF文件第7页 
4.0 Gbps Dual Driver  
ADATE209  
FUNCTIONAL BLOCK DIAGRAM  
FEATURES  
VH1  
VL1  
VT1  
>4.0 Gbps (2 V swings)  
120 ps rise time/fall time (2 V swings)  
<1.0 W for dual driver (<500 mW/channel)  
−1 V to +3.5 V range  
Fast termination mode (VTx)  
Cable loss compensation  
DA1  
DROUT1  
DB1  
TERM1  
CLC1EN  
VH2  
VL2  
VT2  
APPLICATIONS  
Automatic test equipment  
Semiconductor test systems  
Board test systems  
DA2  
DROUT2  
DB2  
TERM2  
Instrumentation and characterization equipment  
High speed memory testing (DDR2/DDR3/DDR4)  
HDMI testing  
CLC2EN  
Figure 1.  
GENERAL DESCRIPTION  
The ADATE209 is a dual pin driver designed for testing DDR2,  
DDR3, and DDR4. It can also be used for high speed SoC applica-  
tions, such as testing PCI Express 1.0 and HDMI™. The device is a  
three-level driver capable of high fidelity swings from 200 mV  
to 4 V over a −1 V to +3.5 V range. It has rise/fall times (20% to  
80%) under 120 ps for a 2 V programmed swing and 150 ps for  
a 3 V programmed swing, and is capable of supporting data  
rates of 4.4 Gbps and 3.2 Gbps, respectively.  
The device is capable of high speed transitions into and out of  
termination mode. It also contains peaking/pre-emphasis circuitry.  
The ADATE209 is available in an 8 mm × 8 mm, 49-ball  
CSP_BGA.  
Rev. 0  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2008 Analog Devices, Inc. All rights reserved.  
 

与ADATE209相关器件

型号 品牌 描述 获取价格 数据表
ADATE209BBCZ ADI 4.0 Gbps Dual Driver

获取价格

ADATE302-02 ADI 500 MHz Dual Integrated DCL with Differential Drive/Receive, Level Setting DACs, and Per P

获取价格

ADATE302-02_17 ADI 500 MHz Dual Integrated DCL

获取价格

ADATE302-02BBCZ ADI 500 MHz Dual Integrated DCL with Differential Drive/Receive, Level Setting DACs, and Per P

获取价格

ADATE302-02BSVZ ADI 500 MHz Dual Integrated DCL

获取价格

ADATE304 ADI 200 MHz Dual Integrated DCL with Level Setting DACs, Per Pin PMU, and Per Chip VHH

获取价格