2-Channel, 500 MSPS DDS
with 10-Bit DACs
AD9958
FEATURES
APPLICATIONS
2 synchronized DDS channels @ 500 MSPS
Independent frequency/phase/amplitude control between
channels
Agile local oscillators
Phased array radars/sonars
Instrumentation
Matched latencies for frequency/phase/amplitude changes
Excellent channel-to-channel isolation (>72 dB)
Linear frequency/phase/amplitude sweeping capability
Up to 16 levels of frequency/phase/amplitude modulation
(pin-selectable)
Synchronized clocking
RF source for AOTF
Single-side band suppressed carriers
Quadrature communications
2 integrated 10-bit digital-to-analog converters (DACs)
Individually programmable DAC full-scale currents
0.12 Hz or better frequency tuning resolution
14-bit phase offset resolution
10-bit output amplitude scaling resolution
Serial I/O port interface (SPI) with 800 Mbps data throughput
Software-/hardware-controlled power-down
Dual supply operation (1.8 V DDS core/3.3 V serial I/O)
Multiple device synchronization
Selectable 4× to 20× REFCLK multiplier (PLL)
Selectable REFCLK crystal oscillator
56-lead LFCSP
FUNCTIONAL BLOCK DIAGRAM
10-BIT
DAC
RECONSTRUCTED
SINE WAVE
AD9958
(2)
500MSPS
10-BIT
DAC
RECONSTRUCTED
SINE WAVE
DDS CORES
MODULATION CONTROL
SYSTEM
CLOCK
SOURCE
TIMING AND
CONTROL
REF CLOCK
INPUT CIRCUITRY
USER INTERFACE
Figure 1.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 © 2005–2008 Analog Devices, Inc. All rights reserved.