5秒后页面跳转
AD9100AD PDF预览

AD9100AD

更新时间: 2024-01-01 20:01:05
品牌 Logo 应用领域
亚德诺 - ADI /
页数 文件大小 规格书
12页 440K
描述
Ultrahigh Speed Monolithic Track-and-Hold

AD9100AD 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:DIP包装说明:SKINNY, SIDE BRAZED, CERAMIC, DIP-20
针数:20Reach Compliance Code:not_compliant
ECCN代码:EAR99HTS代码:8542.31.00.01
风险等级:5.56标称采集时间:0.02 µs
放大器类型:SAMPLE AND HOLD CIRCUIT最大模拟输入电压:5 V
最小模拟输入电压:-5 V最大下降率:6000 V/s
JESD-30 代码:R-CDIP-T20JESD-609代码:e0
长度:26.721 mm负供电电压上限:-6 V
标称负供电电压 (Vsup):-5.2 V功能数量:1
端子数量:20最高工作温度:125 °C
最低工作温度:-55 °C封装主体材料:CERAMIC, METAL-SEALED COFIRED
封装代码:DIP封装等效代码:DIP20,.3
封装形状:RECTANGULAR封装形式:IN-LINE
峰值回流温度(摄氏度):NOT SPECIFIED电源:5,-5.2 V
认证状态:Not Qualified采样并保持/跟踪并保持:TRACK
座面最大高度:4.45 mm子类别:Sample and Hold Circuit
最大压摆率:132 mA供电电压上限:6 V
标称供电电压 (Vsup):5 V表面贴装:NO
技术:BIPOLAR温度等级:MILITARY
端子面层:Tin/Lead (Sn/Pb)端子形式:THROUGH-HOLE
端子节距:2.54 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:7.62 mm
Base Number Matches:1

AD9100AD 数据手册

 浏览型号AD9100AD的Datasheet PDF文件第2页浏览型号AD9100AD的Datasheet PDF文件第3页浏览型号AD9100AD的Datasheet PDF文件第4页浏览型号AD9100AD的Datasheet PDF文件第5页浏览型号AD9100AD的Datasheet PDF文件第6页浏览型号AD9100AD的Datasheet PDF文件第7页 
Ultrahigh Speed  
Monolithic Track-and-Hold  
a
AD9100*  
FEATURES  
FUNCTIONAL BLOCK DIAGRAM  
Excellent Hold Mode Distortion into 250  
–88 dB @ 30 MSPS (2.3 MHz VIN)  
–83 dB @ 30 MSPS (12.1 MHz VIN)  
–74 dB @ 30 MSPS (19.7 MHz VIN)  
16 ns Acquisition Time to 0.01%  
<1 ps Aperture Jitter  
250 MHz Tracking Bandwidth  
83 dB Feedthrough Rejection @ 20 MHz  
3.3 nV/Hz Spectral Noise Density  
MlL-STD-Compliant Versions Available  
CLK CLK  
V
OUT  
A2  
C
A1  
SWITCH  
HOLD  
22pF  
50  
V
IN  
؎2.3V  
CLAMP  
AD9100  
APPLICATIONS  
A/D Conversion  
Direct IF Sampling  
Imaging/FLIR Systems  
Peak Detectors  
Radar/EW/ECM  
Spectrum Analysis  
CCD ATE  
The AD9100 is “user friendly” and easy to apply: (1) it requires  
+5 V/–5.2 V power supplies; (2) the hold capacitor and switch  
power supply decoupling capacitors are built into the DIP pack-  
age; (3) the encode clock is differential ECL to minimize clock  
jitter; (4) the input resistance is typically 800 k; (5) the analog  
input is internally clamped to prevent damage from voltage  
transients.  
GENERAL DESCRIPTION  
The AD9100 is a monolithic track-and-hold amplifier which  
sets a new standard for high speed and high dynamic range  
applications. It is fabricated in a mature high speed complemen-  
tary bipolar process. In addition to innovative design topologies,  
a custom package is utilized to minimize parasitics and optimize  
dynamic performance.  
The AD9100 is available in a 20-lead side-brazed “skinny DIP”  
package. Commercial, industrial, and military temperature  
grade parts are available. Consult the factory for information  
about the availability of 883-qualified devices.  
Acquisition time (hold to track) is 13 ns to 0.1% accuracy, and  
16 ns to 0.01%. The AD9100 boasts superlative hold-mode  
frequency domain performance; when sampling at 30 MSPS  
hold mode distortion is less than 83 dBfs for analog frequencies  
up to 12 MHz; and –74 dBfs at 20 MHz. The AD9100 can also  
drive capacitive loads up to 100 pF with little degradation in  
acquisition time; it is therefore well suited to drive 8- and 10-bit  
flash converters at clock speeds to 50 MSPS. With a spectral  
noise density of 3.3 nV/Hz and feedthrough rejection of 83 dB  
at 20 MHz, the AD9100 is well suited to enhance the dynamic  
range of many 8- to 16-bit systems.  
PRODUCT HIGHLIGHTS  
1. Hold Mode Distortion is guaranteed.  
2. Monolithic construction.  
3. Analog input is internally clamped to protect against over-  
voltage transients and ensure fast recovery.  
4. Output is short circuit protected.  
5. Drives capacitive loads to 100 pF.  
6. Differential ECL clock inputs.  
*Patent pending.  
REV. B  
Information furnished by Analog Devices is believed to be accurate and  
reliable. However, no responsibility is assumed by Analog Devices for its  
use, nor for any infringements of patents or other rights of third parties  
which may result from its use. No license is granted by implication or  
otherwise under any patent or patent rights of Analog Devices.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781/329-4700  
Fax: 781/326-8703  
World Wide Web Site: http://www.analog.com  
© Analog Devices, Inc., 1998  

与AD9100AD相关器件

型号 品牌 描述 获取价格 数据表
AD9100AE ADI IC TRACK AND HOLD AMPLIFIER, 0.02 us ACQUISITION TIME, CQCC28, CERAMIC, LCC-28, Sample and

获取价格

AD9100JD ADI Ultrahigh Speed Monolithic Track-and-Hold

获取价格

AD9100SD ADI Ultrahigh Speed Monolithic Track-and-Hold

获取价格

AD9100SD/883B ADI IC TRACK AND HOLD AMPLIFIER, 0.02 us ACQUISITION TIME, CDIP28, SKINNY, SIDE BRAZED, CERAMI

获取价格

AD9100SE/883B ADI IC TRACK AND HOLD AMPLIFIER, 0.02 us ACQUISITION TIME, CQCC28, CERAMIC, LCC-28, Sample and

获取价格

AD9101 ADI 125 MSPS Monolithic Sampling Amplifier

获取价格