5秒后页面跳转
AD790JR-REEL7 PDF预览

AD790JR-REEL7

更新时间: 2024-02-19 22:05:07
品牌 Logo 应用领域
亚德诺 - ADI 比较器放大器放大器电路光电二极管
页数 文件大小 规格书
8页 214K
描述
Fast, Precision Comparator

AD790JR-REEL7 技术参数

是否无铅: 含铅生命周期:Active
零件包装代码:SOIC包装说明:SOIC-8
针数:8Reach Compliance Code:unknown
风险等级:5.7放大器类型:COMPARATOR
最大平均偏置电流 (IIB):6.5 µA最大输入失调电压:1500 µV
JESD-30 代码:R-PDSO-G8JESD-609代码:e0
长度:4.9 mm湿度敏感等级:1
负供电电压上限:-18 V标称负供电电压 (Vsup):-15 V
功能数量:1端子数量:8
最高工作温度:70 °C最低工作温度:
输出类型:PUSH-PULL封装主体材料:PLASTIC/EPOXY
封装代码:SOP封装形状:RECTANGULAR
封装形式:SMALL OUTLINE峰值回流温度(摄氏度):240
认证状态:COMMERCIAL标称响应时间:45 ns
座面最大高度:1.75 mm子类别:Comparator
供电电压上限:18 V标称供电电压 (Vsup):15 V
表面贴装:YES技术:BIPOLAR
温度等级:COMMERCIAL端子面层:TIN LEAD
端子形式:GULL WING端子节距:1.27 mm
端子位置:DUAL处于峰值回流温度下的最长时间:30
宽度:3.9 mmBase Number Matches:1

AD790JR-REEL7 数据手册

 浏览型号AD790JR-REEL7的Datasheet PDF文件第2页浏览型号AD790JR-REEL7的Datasheet PDF文件第3页浏览型号AD790JR-REEL7的Datasheet PDF文件第4页浏览型号AD790JR-REEL7的Datasheet PDF文件第5页浏览型号AD790JR-REEL7的Datasheet PDF文件第6页浏览型号AD790JR-REEL7的Datasheet PDF文件第7页 
Fast, Precision  
Comparator  
a
AD790  
CO NNECTIO N D IAGRAMS  
FEATURES  
8-P in P lastic Mini-D IP (N)  
and Cerdip (Q) P ackages  
45 ns m ax Propagation Delay  
Single +5 V or Dual ؎15 V Supply Operation  
CMOS or TTL Com patible Output  
250 V m ax Input Offset Voltage  
500 V m ax Input Hysteresis Voltage  
15 V m ax Differential Input Voltage  
Onboard Latch  
60 m W Pow er Dissipation  
Available in 8-Pin Plastic and Herm etic Cerdip  
Packages  
+V  
S
1
2
8
7
V
LOGIC  
AD790  
+IN  
–IN  
OUTPUT  
+
3
4
6
5
GROUND  
LATCH  
–V  
S
MIL-STD-883B Processing Available  
Available in Tape and Reel in Accordance w ith  
EIA-481A Standard  
8-P in SO IC (R) P ackage  
APPLICATIONS  
GROUND  
LATCH  
1
2
3
4
OUTPUT  
8
7
Zero-Crossing Detectors  
Overvoltage Detectors  
Pulse-Width Modulators  
Precision Rectifiers  
Discrete A/ D Converters  
Delta-Sigm a Modulator A/ Ds  
AD790  
V
LOGIC  
–V  
S
6
5
+V  
S
–IN  
+IN  
P RO D UCT D ESCRIP TIO N  
P RO D UCT H IGH LIGH TS  
1. T he AD790s combination of speed, precision, versatility  
and low cost makes it suitable as a general purpose compara-  
tor in analog signal processing and data acquisition systems.  
T he AD790 is a fast (45 ns), precise voltage comparator, with a  
number of features that make it exceptionally versatile and easy  
to use. T he AD790 may operate from either a single +5 V sup-  
ply or a dual ±15 V supply. In the single-supply mode, the  
AD790s inputs may be referred to ground, a feature not found  
in other comparators. In the dual-supply mode it has the unique  
ability of handling a maximum differential voltage of 15 V across  
its input terminals, easing their interfacing to large amplitude  
and dynamic signals.  
2. Built-in hysteresis and a low-glitch output stage minimize the  
chance of unwanted oscillations, making the AD790 easier to  
use than standard open-loop comparators.  
3. T he hysteresis combined with a wide input voltage range  
enables the AD790 to respond to both slow, low level (e.g.,  
10 mV) signals and fast, large amplitude (e.g., 10 V) signals.  
T his device is fabricated using Analog Devices’ Complementary  
Bipolar (CB) process–which gives the AD790s combination of  
fast response time and outstanding input voltage resolution  
(1 mV max). T o preserve its speed and accuracy, the AD790  
incorporates a “low glitch” output stage that does not exhibit  
the large current spikes normally found in T T L or CMOS out-  
put stages. Its controlled switching reduces power supply distur-  
bances that can feed back to the input and cause undesired  
oscillations. The AD790 also has a latching function which makes  
it suitable for applications requiring synchronous operation.  
4. A wide variety of supply voltages are acceptable for operation  
of the AD790, ranging from single +5 V to dual +5 V/–12 V,  
±5 V, or +5 V/±15 V supplies.  
5. T he AD790s power dissipation is the lowest of any compara-  
tor in its speed range.  
6. T he AD790s output swing is symmetric between VLOGIC  
and ground, thus providing a predictable output under a  
wide range of input and output conditions.  
T he AD790 is available in five performance grades. The AD790J  
and the AD790K are rated over the commercial temperature  
range of 0°C to +70°C. T he AD790A and AD790B are rated  
over the industrial temperature range of –40°C to +85°C. T he  
AD790S is rated over the military temperature range of –55°C to  
+125°C and is available processed to MIL-ST D-883B, Rev. C.  
REV. B  
Inform ation furnished by Analog Devices is believed to be accurate and  
reliable. However, no responsibility is assum ed by Analog Devices for its  
use, nor for any infringem ents of patents or other rights of third parties  
which m ay result from its use. No license is granted by im plication or  
otherwise under any patent or patent rights of Analog Devices.  
One Technology Way, P.O. Box 9106, Norw ood, MA 02062-9106, U.S.A.  
Tel: 617/ 329-4700  
Fax: 617/ 326-8703  

与AD790JR-REEL7相关器件

型号 品牌 描述 获取价格 数据表
AD790JRZ ADI Fast, Precision Comparator

获取价格

AD790JRZ-REEL ADI Fast, Precision Comparator

获取价格

AD790JRZ-REEL7 ADI Fast, Precision Comparator

获取价格

AD790KN ADI Fast, Precision Comparator

获取价格

AD790S ADI Fast, Precision Comparator

获取价格

AD790SQ ADI Fast, Precision Comparator

获取价格