5秒后页面跳转
AD676JN PDF预览

AD676JN

更新时间: 2024-01-03 06:05:31
品牌 Logo 应用领域
亚德诺 - ADI /
页数 文件大小 规格书
16页 391K
描述
16-Bit 100 kSPS Sampling ADC

AD676JN 技术参数

是否Rohs认证: 不符合生命周期:Obsolete
零件包装代码:DIP包装说明:SIDE BRAZED, CERAMIC, DIP-28
针数:28Reach Compliance Code:not_compliant
ECCN代码:3A001.A.2.CHTS代码:8542.39.00.01
风险等级:5.67Is Samacsys:N
最大模拟输入电压:10 V最小模拟输入电压:-10 V
最长转换时间:1000 µs转换器类型:ADC, SUCCESSIVE APPROXIMATION
JESD-30 代码:R-CDIP-T28JESD-609代码:e0
最大线性误差 (EL):0.003%标称负供电电压:-12 V
位数:16功能数量:1
端子数量:28最高工作温度:125 °C
最低工作温度:-55 °C输出位码:BINARY
输出格式:PARALLEL, WORD封装主体材料:CERAMIC, METAL-SEALED COFIRED
封装代码:DIP封装等效代码:DIP28,.6
封装形状:RECTANGULAR封装形式:IN-LINE
峰值回流温度(摄氏度):NOT SPECIFIED电源:5,+-12 V
认证状态:Not Qualified采样速率:0.1 MHz
采样并保持/跟踪并保持:SAMPLE座面最大高度:5.72 mm
子类别:Analog to Digital Converters最大压摆率:12 mA
标称供电电压:12 V表面贴装:NO
技术:BIMOS温度等级:MILITARY
端子面层:Tin/Lead (Sn/Pb)端子形式:THROUGH-HOLE
端子节距:2.54 mm端子位置:DUAL
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:15.24 mm
Base Number Matches:1

AD676JN 数据手册

 浏览型号AD676JN的Datasheet PDF文件第2页浏览型号AD676JN的Datasheet PDF文件第3页浏览型号AD676JN的Datasheet PDF文件第4页浏览型号AD676JN的Datasheet PDF文件第5页浏览型号AD676JN的Datasheet PDF文件第6页浏览型号AD676JN的Datasheet PDF文件第7页 
16-Bit 100 kSPS  
Sampling ADC  
a
AD676  
FUNCTIONAL BLOCK DIAGRAM  
FEATURES  
Autocalibrating  
On-Chip Sample-Hold Function  
Parallel Output Format  
16 Bits No Missing Codes  
؎1 LSB INL  
ANALOG  
CHIP  
V
15  
14  
IN  
AGND SENSE  
16-BIT  
DAC  
INPUT  
BUFFERS  
COMP  
V
1
16  
REF  
–97 dB THD  
90 dB S/(N+D)  
1 MHz Full Power Bandwidth  
13  
AGND  
CAL  
DAC  
LOGIC & TIMING  
LEVEL TRANSLATORS  
DIGITAL  
BUSY  
7
CHIP  
SAR  
1
6
8
9
CAL  
PAT  
GEN  
L
A
T
C
H
MICRO-CODED  
CONTROLLER  
SAMPLE  
BIT 1 – BIT 16  
19  
28  
ALU  
RAM  
CLK 10  
PRODUCT DESCRIPTION  
The AD676 is a multipurpose 16-bit parallel output analog-to-  
digital converter which utilizes a switched-capacitor/charge  
redistribution architecture to achieve a 100 kSPS conversion  
rate (10 µs total conversion time). Overall performance is opti-  
mized by digitally correcting internal nonlinearities through  
on-chip autocalibration.  
AD676  
The AD676 operates from +5 V and ±12 V supplies and typi-  
cally consumes 360 mW during conversion. The digital supply  
(VDD) is separated from the analog supplies (VCC, VEE) for re-  
duced digital crosstalk. An analog ground sense is provided for  
the analog input. Separate analog and digital grounds are also  
provided.  
The AD676 circuitry is segmented onto two monolithic chips—  
a digital control chip fabricated on Analog Devices DSP CMOS  
process and an analog ADC chip fabricated on our BiMOS II  
process. Both chips are contained in a single package.  
The AD676 is specified for ac (or “dynamic”) parameters such  
as S/(N+D) Ratio, THD and IMD which are important in sig-  
nal processing applications. In addition, dc parameters are  
specified which are important in measurement applications.  
The AD676 is available in a 28-pin plastic DIP or 28-pin side-  
brazed ceramic package. A serial-output version, the AD677, is  
available in a 16-pin 300 mil wide ceramic or plastic package.  
REV. A  
Information furnished by Analog Devices is believed to be accurate and  
reliable. However, no responsibility is assumed by Analog Devices for its  
use, nor for any infringements of patents or other rights of third parties  
which may result from its use. No license is granted by implication or  
otherwise under any patent or patent rights of Analog Devices.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 617/329-4700  
Fax: 617/326-8703  

与AD676JN相关器件

型号 品牌 描述 获取价格 数据表
AD676JNZ ADI 16-Bit Parallel 100 kSPS Sampling ADC

获取价格

AD676KD ADI 16-Bit 100 kSPS Sampling ADC

获取价格

AD676KDZ ADI 暂无描述

获取价格

AD676KN ADI 16-Bit 100 kSPS Sampling ADC

获取价格

AD676TD ETC Analog-to-Digital Converter, 16-Bit

获取价格

AD676TD/883B ADI IC 1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, PARALLEL ACCESS, CDIP28, SIDE BRAZED, CERAMIC

获取价格