5秒后页面跳转
AD5750BCPZ-REEL PDF预览

AD5750BCPZ-REEL

更新时间: 2024-01-07 07:44:24
品牌 Logo 应用领域
亚德诺 - ADI 驱动器
页数 文件大小 规格书
36页 695K
描述
Industrial Current/Voltage Output Driver with Programmable Ranges

AD5750BCPZ-REEL 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Obsolete零件包装代码:QFN
包装说明:HVQCCN, LCC32,.2SQ,20针数:32
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.04
内置保护:TRANSIENT; OVER CURRENT接口集成电路类型:BUFFER OR INVERTER BASED PERIPHERAL DRIVER
JESD-30 代码:S-XQCC-N32JESD-609代码:e3
长度:5 mm湿度敏感等级:1
功能数量:1端子数量:32
最高工作温度:105 °C最低工作温度:-40 °C
输出电流流向:SOURCE AND SINK标称输出峰值电流:0.015 A
封装主体材料:UNSPECIFIED封装代码:HVQCCN
封装等效代码:LCC32,.2SQ,20封装形状:SQUARE
封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度(摄氏度):225
电源:3/5,+-12/+-24 V认证状态:Not Qualified
座面最大高度:1 mm子类别:Peripheral Drivers
最大供电电压:24 V最小供电电压:12 V
表面贴装:YES温度等级:INDUSTRIAL
端子面层:MATTE TIN端子形式:NO LEAD
端子节距:0.5 mm端子位置:QUAD
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:5 mm
Base Number Matches:1

AD5750BCPZ-REEL 数据手册

 浏览型号AD5750BCPZ-REEL的Datasheet PDF文件第2页浏览型号AD5750BCPZ-REEL的Datasheet PDF文件第3页浏览型号AD5750BCPZ-REEL的Datasheet PDF文件第4页浏览型号AD5750BCPZ-REEL的Datasheet PDF文件第5页浏览型号AD5750BCPZ-REEL的Datasheet PDF文件第6页浏览型号AD5750BCPZ-REEL的Datasheet PDF文件第7页 
Industrial Current/Voltage Output Driver  
with Programmable Ranges  
AD5750/AD5750-1  
The output current range is programmable across five current  
ranges: 4 mA to 20 mA, 0 mA to 20 mA or 0 mA to 24 mA,  
FEATURES  
Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA or  
0 mA to 24 mA, ±20 mA, and ±24 mA  
±0.03% FSR total unadjusted error (TUE)  
±± ppm/°C typical output drift  
20 mA, and 24 mA. An overrange of 2% is available on the  
unipolar current ranges.  
Voltage output is provided from a separate pin that can  
be configured to provide 0 V to 5 V, 0 V to 10 V, 5 V, or  
10 V output ranges. An overrange of 20% is available on the  
voltage ranges.  
Voltage output ranges: 0 V to ± V, 0 V to 10 V, ±± V, and ±10 V,  
with 20% overrange  
±0.02% FSR TUE  
±3 ppm/°C typical output drift  
Flexible serial digital interface  
On-chip output fault detection  
PEC error checking  
Analog outputs are short-circuit and open-circuit protected and  
can drive capacitive loads of 1 μF and inductive loads of 0.1 H.  
The device is specified to operate with a power supply range from  
12 V to 24 V. Output loop compliance is 0 V to AVDD − 2.75 V.  
Asynchronous CLEAR function  
Flexible power-up condition to 0 V or tristate  
Power supply range  
The flexible serial interface is SPI and MICROWIRE  
compatible and can be operated in 3-wire mode to minimize  
the digital isolation required in isolated applications. The  
interface also features an optional PEC error checking feature  
using CRC-8 error checking, useful in industrial environments  
where data communication corruption can occur.  
AVDD: +12 V (± 10%) to +24 V (± 10%)  
AVSS: −12 V (± 10%) to −24 V (± 10%)  
Output loop compliance to AVDD − 2.7± V  
Temperature range: −40°C to +10±°C  
32-lead, ± mm × ± mm LFCSP package  
The device also includes a power-on reset function, ensuring  
that the device powers up in a known state (0 V or tristate),  
and an asynchronous CLEAR pin that sets the outputs to zero  
scale/midscale voltage output or the low end of the selected  
current range.  
APPLICATIONS  
Process control  
Actuator control  
PLCs  
An HW SELECT pin is used to configure the part for hardware  
or software mode on power-up.  
GENERAL DESCRIPTION  
The AD5750/AD5750-1 are single-channel, low cost, precision  
voltage/current output drivers with hardware- or software-  
programmable output ranges. The software ranges are configured  
via an SPI-/MICROWIRE™-compatible serial interface. The  
AD5750/AD5750-1 target applications in PLC and industrial  
process control. The analog input to the AD5750/AD5750-1  
is provided from a low voltage, single-supply digital-to-analog  
converter (DAC) and is internally conditioned to provide the  
desired output current/voltage range. Analog input ranges available  
are 0 V to 2.5 V (AD5750-1) or 0 V to 4.096 V (AD5750).  
Table 1. Related Device  
Part Number Description  
AD5422  
Single-channel, 16-bit, serial input current  
source and voltage output DAC  
Rev. A  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2009 Analog Devices, Inc. All rights reserved.  
 

与AD5750BCPZ-REEL相关器件

型号 品牌 描述 获取价格 数据表
AD5750BCPZ-REEL7 ADI Industrial Current/Voltage Output Driver with Programmable Ranges

获取价格

AD5751 ADI Industrial I/V Output Driver, Single Supply, 60v Compliance, Programmable Ranges

获取价格

AD5751ACPZ ADI Industrial I/V Output Driver, Single-Supply, 55 V Maximum Supply, Programmable Ranges

获取价格

AD5751ACPZ-REEL7 ADI Industrial I/V Output Driver, Single-Supply, 55 V Maximum Supply, Programmable Ranges

获取价格

AD5751BCPZ ADI Industrial I/V Output Driver, Single Supply, 60v Compliance, Programmable Ranges

获取价格

AD5752 ADI Complete, Dual, 12-/14-/16-Bit, Serial Input, Unipolar/Bipolar, Voltage Output DACs

获取价格