5秒后页面跳转
捷配首页

Datasheet > 驱动程序和接口 > 外围驱动器> AD5750
AD5750 PDF预览

AD5750

更新时间： 2024-02-13 14:23:23
品牌 Logo 应用领域
亚德诺 - ADI 驱动器
页数 文件大小 规格书
25页 252K
描述
Industrial Current/Voltage Output Driver, Programmable Ranges

阅读下载

获取价格

AD5750 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Obsolete零件包装代码：QFN
包装说明：HVQCCN, LCC32,.2SQ,20针数：32
Reach Compliance Code：compliantECCN代码：EAR99
HTS代码：8542.39.00.01风险等级：5.04
内置保护：TRANSIENT; OVER CURRENT接口集成电路类型：BUFFER OR INVERTER BASED PERIPHERAL DRIVER
JESD-30 代码：S-XQCC-N32JESD-609代码：e3
长度：5 mm湿度敏感等级：1
功能数量：1端子数量：32
最高工作温度：105 °C最低工作温度：-40 °C
输出电流流向：SOURCE AND SINK标称输出峰值电流：0.015 A
封装主体材料：UNSPECIFIED封装代码：HVQCCN
封装等效代码：LCC32,.2SQ,20封装形状：SQUARE
封装形式：CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度（摄氏度）：225
电源：3/5,+-12/+-24 V认证状态：Not Qualified
座面最大高度：1 mm子类别：Peripheral Drivers
最大供电电压：24 V最小供电电压：12 V
表面贴装：YES温度等级：INDUSTRIAL
端子面层：MATTE TIN端子形式：NO LEAD
端子节距：0.5 mm端子位置：QUAD
处于峰值回流温度下的最长时间：NOT SPECIFIED宽度：5 mm
Base Number Matches：1

AD5750 数据手册

 浏览型号AD5750的Datasheet PDF文件第2页浏览型号AD5750的Datasheet PDF文件第3页浏览型号AD5750的Datasheet PDF文件第4页浏览型号AD5750的Datasheet PDF文件第5页浏览型号AD5750的Datasheet PDF文件第6页浏览型号AD5750的Datasheet PDF文件第7页 
Industrial Current/Voltage  
Output Driver,  
Programmable Ranges  
Preliminary Technical Data  
AD5750  
Voltage output is provided from a separate pin that can be  
configured to provide 0V to 5V, 0V to 10V, ±5V or ±10V  
output ranges. An over-range of 20% is available on the voltage  
ranges.  
FEATURES  
Current Output Ranges: 4–20mA, 0–20mA or 0–24mA,  
20ma, 24ma  
B Grade - 0.1% Total Unadjusted Error (TUE)  
A Grade - 0.3% Total Unadjusted Error (TUE)  
5ppm/°C Output Drift  
Analog outputs are short and open circuit protected and can  
drive capacitive loads of 1uF and inductive loads of 0.1H.  
The device is specified to operate with a power supply range  
from ±12 V to ±24 V. Output loop compliance is 0 V to AVDD  
– 2.5 V.  
Voltage Output Ranges: 0-5V, 0-10V, 5V, 10V,  
20% over-range  
B Grade - 0.1% Total Unadjusted Error (TUE)  
A Grade - 0.3% Total Unadjusted Error (TUE)  
Flexible Serial Digital Interface  
On-Chip Output Fault Detection  
PEC Error Checking  
The flexible serial interface is SPI and MICROWIRE  
compatible and can be operated in 3-wire mode to minimize the  
digital isolation required in isolated applications. The interface  
also features an optional PEC error checking feature using  
CRC-8 error checking, useful in industrial environments where  
data communication corruption can occur.  
Asynchronous CLEAR Function  
Power Supply Range  
AVDD : = +12V to +24V (+/-10%)  
AVSS : = -12V to -24V (+/-10%)  
Output Loop Compliance to AVDD – 2.5 V  
Temperature Range: -40°C to +105°C  
LFCSP Packages  
The device also includes a power-on-reset function ensuring  
that the device powers up in a known state and an  
asynchronous CLEAR pin which sets the outputs to zero-scale /  
mid-scale voltage output or the low end of the selected current  
range.  
APPLICATIONS  
A HW SELECT pin is used to configure the part for hardware  
or software mode on power up.  
Process Control  
Actuator Control  
PLC  
The total output error is typically ±0.1% in both current mode  
and voltage mode.  
GENERAL DESCRIPTION  
The AD5750 is a single channel, low-cost, precision,  
voltage/current output driver with hardware or software  
programmable output ranges. The software ranges are  
configured via an SPI/Microwire compatible serial interface.  
The AD5750 targets applications in PLC and industrial process  
control. The analog input to the AD5750 is provided from a  
low voltage, single supply digital-to-analog converter and is  
internally conditioned to provide the desired output  
current/voltage range.  
Table 1. Related Devices  
Part Number  
Description  
AD5422  
Single Channel, 16-Bit, Serial  
Input Current Source and  
Voltage Output DAC  
The output current range is programmable across five current  
ranges - 4–20mA, 0–20mA or 0–24mA, 20mꢀ ꢀnd 24mꢀ.  
Rev. PrC  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rights of third parties that may result from its use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks and registeredtrademarks arethe property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700  
Fax: 781.461.3113  
www.analog.com  
©2008 Analog Devices, Inc. All rights reserved.  
1234567...25

下载PDF

与AD5750相关器件

型号 品牌 描述 获取价格 数据表
AD5750_09 ADI Industrial Current/Voltage Output Driver with Programmable Ranges

获取价格
AD5750_12 ADI Industrial Current/Voltage Output Driver

获取价格
AD5750-1 ADI Industrial Current/Voltage Output Driver with Programmable Ranges

获取价格
AD5750-1ACPZ ADI Industrial Current/Voltage Output Driver

获取价格
AD5750-1ACPZ-REEL ADI Industrial Current/Voltage Output Driver with Programmable Ranges

获取价格
AD5750-1ACPZ-REEL7 ADI Industrial Current/Voltage Output Driver with Programmable Ranges

获取价格

与AD5750相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证