Class D/1-Bit Audio Power Output Stage
AD1991
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
2-Channel Mode
Class D/1-Bit Audio Power Output Stage
5 V Analog and Digital Supply Voltages
Power Stage Power Supply 8 V to 20 V
Output Power @ 0.1% THD + N
Stereo Mode
AV
DD
DV
DD
PV
DD
6
OUTA
3
A1
A2
INA
2 ꢀ 20 W @ 4 ꢁ @ 14.4 V
2 ꢀ 20 W @ 8 ꢁ @ 20 V
LEFT
INPUT
Mono Mode
1 ꢀ 40 W @ 4 ꢁ @ 20 V
RON < 320 mꢁ (per Transistor)
Efficiency > 85% @ Full Power/8 ꢁ
Clickless Mute Function
B1
B2
INB
OUTB
3
LEVEL SHIFTER
AND
SWITCH CONTROL
H-BRIDGE
OUTC
3
Turn-On and Turn-Off Pop Suppression
Short-Circuit Protection
Overtemperature Protection
Data Loss Protection
2-Channel BTL Outputs or
4-Channel Single-Ended Outputs
52-Lead Exposed Pad TQFP Package
Low Cost DMOS Process
C1
C2
INC
RIGHT
INPUT
D1
D2
IND
OUTD
3
،n
CURRENT OVERLOAD
CLK
RST/PDN
MUTE
THERMAL SHUTDOWN
THERMAL WARNING
DATA LOSS
THERMAL PROTECTION
SHORT-CIRCUIT PROTECTION
MUTE CONTROL
APPLICATIONS
PC Audio Systems
Minicomponents
Automotive Amplifiers
Home Theater Systems
Televisions
4
2
14
AGND DGND
TEST
CONTROL
PGND
4-Channel Mode
AV
DD
DV
DD
PV
DD
6
GENERAL DESCRIPTION
The AD1991 is a 2-channel BTL or 4-channel single-ended
class D audio power output stage. The part is configured during
reset to be in either 2-channel mode or 4-channel mode.
A1
A2
OUTA
3
INA
INB
LOAD
REQUIRING
DC VOLTAGE
SUPPLY
To protect the IC as well as the connected speakers, the AD1991
provides turn-on and turn-off pop suppression, short-circuit
protection, and overtemperature shutdown. To control the IC,
a power-down/reset input and a mute pin are available.
B1
B2
OUTB
3
LEVEL SHIFTER
AND
SWITCH CONTROL
The output stage can be operated over a power supply range
from 8 V to 20 V.
H-BRIDGE
C1
C2
OUTC
3
INC
In 2-channel mode, Transistors A1, B2, C1, and D2 are turned
on by a Logic 1 on inputs INA and INC, and Transistors A2,
B1, C2, and D1 are turned on by a Logic 0 on inputs INA and
INC. In 4-channel mode, Transistors A1, B1, C1, and D1 are
turned on by a Logic 1 on the four inputs, and Transistors A2,
B2, C2, and D2 are turned on by a Logic 0 on the four inputs
(see the Functional Block Diagrams).
D1
D2
OUTD
3
IND
LOAD
REQUIRING
DC VOLTAGE
SUPPLY
،n
CLK
CURRENT OVERLOAD
THERMAL SHUTDOWN
THERMAL WARNING
DATA LOSS
THERMAL PROTECTION
SHORT-CIRCUIT PROTECTION
MUTE CONTROL
RST/PDN
MUTE
4
2
14
REV. 0
AGND DGND
TEST
PGND
CONTROL
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© 2003 Analog Devices, Inc. All rights reserved.