9000 Series
Power Toggle Switches
Features/Benefits
Typical Applications
•
•
•
•
•
Power ratings up to 10 AMPS
Double pole models
•
•
Shut-off switch
Small equipment
Locking lever options available
Wide variety of actuator styles
RoHS compliant and compatible
UL 61058-1
Specifications
Materials
CONTACT RATING:
9201 Model
CASE: Diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Brass, chrome plated.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
GP (general purpose)
6 AMPS 125 VAC 50/60 Hz T85 10,000 cycles (10E3)
3 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
SWITCH SUPPORT: Brass or steel, matte-tin plated.
END CONTACTS: 9201 Model: Coin silver, silver plated.
9221 Model: Silver cadmium oxide.
6 AMPS 30 VDC T85 10,000 cycles
9221 Model:
CENTER CONTACTS: Copper alloy, silver plated
GP (general purpose)
ALL TERMINALS: 9201 Model: Copper alloy, silver plated.
9221 Model: Copper alloy, matte-tin plated.
10 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
5 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated.
10 AMPS 30 VDC T85 10,000 cycles
ELECTRICAL LIFE: 25,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @
2-4 V DC, 100 mA.
NOTE: Any models supplied with Q contact material are RoHS compliant and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages F-49 thru F-52. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
9201 DPDT, On-On, 6 Amps
9221 DPDT, On-On, 10 Amps
Actuator
S
K
Antirotation, .410” high
Locking lever, .650” high
Bushing
H3 .296” high, keyway
CW Splashproof
K1 Locking lever, .680” high
L43 Lever handle with cap
P3 Flatted, anti-rotation, .450” high
H
.296” high, flat
T
.687” high, 15/32 bushing
Terminations
Solder lug
T1 .460” high, 15/32 bushing
Z
Z4 Quick connect
Contact Material
Silver
(9221 only)
AV2 Vert. right angle, PC thru-hole
(9201 only)
Q
Seal
E
Epoxy
C
PC Thru-hole
D No epoxy
F
Actuator Color/Finish
NONE Bright chrome
Bushing Finish
NONE Nickel
2
Black
2
Black
KXX Actuator Color/Finish
NONE Natural aluminum
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
2
Black anodized aluminum
10 jul 18
www.ckswitches.com
F–50