9000 Series
Power Rocker and Lever Handle Switches
Features/Benefits
Typical Applications
•
•
•
Thermoset UL 94V-0 housing
Rugged construction
•
•
Small equipment
Shut-off switch
Variety of actuator and
termination options
•
RoHS compliant
UL 61058-1
Specifications
Materials
CONTACT RATING:
CASE: Diallyl phthalate (DAP) (UL 94V-0).
9201 Model:
ACTUATOR: Nylon, black standard.
GP (general purpose)
FRAME-REAR MOUNT OPTIONS: Spring steel, black.
BUSHING: Brass, nickel plated.
6 AMPS 125 VAC 50/60 Hz T85 10,000 cycles (10E3)
3 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
MOUNTING BRACKET: Stainless steel.
6 AMPS 30 VDC T85 10,000 cycles
9221 Model:
END CONTACTS: 9201 Model: Coin silver, silver plated.
9221 Model: Silver cadmium oxide.
GP (general purpose)
10 AMPS 125 VAC 50/60 Hz T85 10,000 cycles
5 AMPS 250 VAC 50/60 Hz T85 10,000 cycles
R (resistive)
CENTER CONTACTS: Copper alloy, silver plated
ALL TERMINALS: 9201 Model: Copper alloy, silver plated.
9221 Model: Copper alloy, matte-tin plated.
10 AMPS 30 VDC T85 10,000 cycles
ELECTRICAL LIFE: 25,000 make-and-break cycles at full load.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut, Screw & Lockwasher: Stainless steel. Standoff:
Nylon standard, aluminum available, consult Customer
Service Center.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @
2–4 V DC, 100 mA.
9
INSULATION RESISTANCE: 10 Ω min.
*Cadmium used in electrical contacts is acceptable for RoHS.
NOTE: Any models supplied with Q contact material are RoHS compliant.
DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
NOTE: Specifications and materials listed above are for switches with standard options.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown
and described on pages G-52 through G-55. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
9201 DP On-On, 6 Amps
9221 DP On-On, 10 Amps
Actuator
J1 Rocker
J2 Lever
J3 Rocker
J37 Rocker with metal frame
Terminations
Z
Solder lug (9201 only)
AV2 Vertical right angle, PC thru-hole (9201 only)
PC Thru-hole (9201 only)
C
Z4 Quick connect
Contact Material
Q
Silver
Seal
E
D
Epoxy
No Seal
Actuator Color
2
1
3
Black
White
Red
Frame Color
Black
NONE No frame color required
2
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
G
www.ckswitches.com
G–52