Jitter Attenuator & FemtoClock® Multiplier
IDT8V89308I
DATA SHEET
General Description
Features
The IDT8V89308I is a PLL based synchronous multiplier specifically
designed for applications utilizing Broadcom PHYs and Switches.
This high performance device is optimized for Ethernet / SONET /
PDH frequency translation and clock jitter attenuation. The device
contains two internal frequency multiplication stages that are
cascaded in series. The first stage is a low bandwidth PLL that is
optimized to provide reference clock jitter attenuation. The second
stage is a FemtoClock® frequency multiplier that provides the low
jitter, high frequency Ethernet output clock that easily meets Gigabit
and 10 Gigabit Ethernet jitter requirements. Pre-divider and output
divider multiplication ratios are selected using device selection
control pins. The multiplication ratios are optimized to support most
common clock rates used in Ethernet, SONET, PDH applications.
IDT8V89308I requires the use of an external, inexpensive
fundamental mode crystal and uses external passive loop filter
components which allows configuration of the PLL loop bandwidth
and damping characteristics. The device is packaged in a
space-saving 32-VFQFN package and supports industrial
temperature range.
• Two LVPECL output pairs
Each output supports independent frequency selection at 25MHz,
125MHz and 156.25MHz
• One differential input supports the following input types: LVPECL,
LVDS
• Accepts input frequencies 8kHz, 25MHz,125MHz and 155.52MHz
• First stage PLL bandwidth can be optimized for jitter attenuation
and reference tracking using external loop filter connection
• FemtoClock frequency multiplier provides low jitter, high
frequency output
• Absolute pull range: 50ppm
• FemtoClock VCO frequency: 625MHz
• RMS phase jitter @ 25MHz, using a 25MHz crystal
(12kHz – 5MHz): 0.238ps (typical), 0.30ps (maximum)
• RMS phase jitter @ 125MHz, using a 25MHz crystal
(12kHz – 20MHz): 0.223ps (typical), 0.30ps (maximum)
• RMS phase jitter @ 156.25MHz, using a 25MHz crystal
(12kHz – 20MHz): 0.223ps (typical), 0.30ps (maximum)
• 3.3V supply voltage
• -40°C to 85°C ambient operating temperature
• Available in lead-free (RoHS 6) package
Pin Assignment
32 31 30 29 28 27 26 25
1
2
3
4
5
LF1
VEE
24
23
22
21
20
LF0
nQB
QB
ISET
VCCO
nQA
VEE
nc
VCC
6
7
8
QA
19
18
17
RESERVED
VEE
VEE
_
ODASEL 0
9
10 11 12 13 14 15 16
IDT8V89308I
32 Lead VFQFN
5mm x 5mm x 0.925mm package body
NL Package
Top View
IDT8V89308ANLGI REVISION A JUNE 18, 2012
1
©2012 Integrated Device Technology, Inc.