Fuse Holder Datasheet
870 Series
Medical Grade Shock-Safe Holder for 5×20mm Fuses
RoHS Pb
Product Characteristics 870
For Shocksafe, Medical Grade,
5×20mm fuses
Compatible Fuses
Holder/Cap: BlackThermoplastic, UL 94V0
Metal Parts: Copper alloy, corrosion protected
Terminals: Solderable, tinned
Rated Voltage: 250V
Materials
Electrical Data (23ºC)
Rated Current: 10A
Rated Power: 1.6W (VDE)
12.7mm diameter D-hole or 13mm round hole
Admissible torque on plastic hex nut is 1.2Nm
Solderable or 4.8mm quick connect-fits 0.5mm
tab
Mounting
Terminals
IP 40 (IEC 60529)
PC3 (IEC 60127-6)
Live parts are fully inaccessible to a 1mm
diameter probe
Protection Class &
Category
Additional Information
OperatingTemperature
ClimaticTest
-40ºC to +85ºC
-40ºC/+85ºC/21 days
(IEC 60068-2-1...3)
Stock Conditions
Contact Resistance
ImpulseVoltage
0°C to 60°C, max. 70% R.H.
≤ 5mΩ at 20 mV
4 kV, 50Hz, 1 min., dry
> 103 MΩ (500VDC, 1 min.)
Insulation Resistance
Resources
Accessories
Samples
350ºC, 2 sec.
acc. to IEC 60068-2-20, TestTa method 2
Solderability
Soldering Heat
Resistance
Minimum Cross Section Conductor - 2.5mm2
350ºC, 10 sec. (IEC 60068-2-20)
acc. to IEC 60068-2-20, TestTb, method 2
Dimensions 870
35,1 + 0,2
16,2
Marking
870, 250V, Agency Approvals
5.6g
8,9 +0,15
UnitWeight
max. 7
Refer to Fuseology for information on proper fuseholder re-rating.
Agency Approvals
M12,7x1,5
4
0,5
Agency
Agency File Number
43,6 + 0,2
40003282
E70164
Includes Captive Cap
13 -0,3
12 -0,1
Ordering Information
Ordering Number
Packaging
87000001009
Bulk 100 Pcs
Panel alternatives
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics.
© 2022 Littelfuse, Inc.
Specifications are subject to change without notice.
1
Revised: GD 10/21/22