Cartridge Fuse Holders
Enclosed Fuseholders > Panel/Circuit Board Mounted
RoHS
Pb
860/862 Series Enclosed Fuseholders for 5×20mm and 6.2x32mm Fuses
Product Characteristics
860 Series
862 Series
865 Cap
Compatible
Fuses
5×20mm
6.3x32mm (3AB/3AG)
For 5×20mm Fuses
860 Series Holder
Panel Mounted
Holder/Cap: BlackThermoplastic, UL 94V0
Metal Parts: Copper alloy, corrosion protected
Terminals: Solderable tinned
Materials
866 Cap
For 6.3×32mm Fuses
862 Series Holder
Circuit Board Mounted
Rated Voltage: 250V
Rated Current:
10A (VDE) 16A (CSA)
20A (UL)
Rated Current:
10A
16A (UL/CSA)
Electrical Data
(23ºC)
Rated Power:
862/865: 2.5W
862/866: 3.2W
Rated Power:
4.0W (VDE)
Agency Approval
Agency File Number
(2) Solder pins
0.5mm×1.1mm and plastic
stud
Pins are kicked for optimal
soldering
12.7mm diameter D-hole or
double D-hole Admissible
torque on plastic hex nut
is 1.2Nm
Agency
860 Series
40048042
E70164
862 Series
N/A
Mounting
Terminals
E70164
Solderable or 4.8mm quick
connect-fits 0.5mm tab
Solderable tinned
Protection
Class &
Category
IP 40 (IEC 60529)
PC2 (IEC 60127-6)
IP 40 (IEC 60529)
PC2 (IEC 60127-6)
Additional Information
Operating
-40ºC to +85ºC
Temperature*
ClimaticTest
-40ºC/+85ºC/21 days (IEC 60068-2-1...3)
Stock
Conditions
+10ºC to +60ºC relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%
Datasheet
860 Series
Resources
860 Series
Samples
860 Series
24 cycles at 15 min. each
(IEC 60068-2-6)
10 - 60Hz at 0.75mm amplitude
60 - 500Hz at 10g acceleration
Vibration
Resistance
Contact
Resistance
≤ 5mΩ
Datasheet
862 Series
Resources
862 Series
Samples
862 Series
Impulse
Voltage
4 kV, 50Hz, 1 min., dry
> 103 MΩ (500VDC, 1 min.)
Insulation
Resistance
235ºC, 2 sec. (Wave)
350ºC, 1 sec. (Soldering Iron)
Solderability
Soldering Heat
Resistance
350ºC, 5 sec. (IEC 60068-2-20)
Minimum
Cross Section
Conductor - 2.5mm2
860, 250V, Approvals
Conducting path - 0.2mm2
862, 250V, Approvals
Marking
UnitWeight
5.3g (860) / 5.6g (862) / 3.3g (865) / 2.5g (866)
* - Refer to Fuseology for information on proper fuseholder re-rating.
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/17/21