FEATURES / BENEFITS
ꢀ ATEX certified, equipment group II (surface industries),
category 3 (zone 2), T4 rated
ꢀ Suitable for all Class 1, Div 2, Groups A, B, C, D
hazardous environments, T4 rated
HAZARDOUS LOCATION
LED VISUAL SIGNAL LIGHT
ꢀ Inherent safety capability; low electrical/thermal energy
and high light output
ꢀ Unique optically designed lens to enhance LED
operation and provide 360o visibility
ꢀ Weather/corrosion resistant lamp assembly and
housing
ꢀ Self-contained wiring compartment eliminates
additional boxes
ꢀ Can be operated steady or flashed (controller not supplied)
ꢀ Available as a single or dual unit
ꢀ Resistant to shock and vibration
ꢀ Threaded 1” and 3/4” bottom hub for mounting
ꢀ Lasts years longer than an incandescent
ꢀ 5 year warranty
ETL Listed in compliance with
UL1598 and UL844 for use in
Class 1, Div 2 Hazardous Locations
ꢀ IP 65 / IP 66 / NEMA 4X rated
US PATENT# 6,425,678
Certified to:
ATEX, equipment group II (surface
industries), category 3 (zone 2), T4 rated
Ex nA IIC T4
APPLICATION
ꢀThe Dialight Visual Signal Light is an LED BASED Class 1, Division 2 certified fixture. Used for visual indication
in hazardous environments, providing a valuable solution to the petrochemical industry facilities.
OPERATING CONDITIONS
o
o
o
ꢀ Temperatures ranging from -67 F to +131 F (-55 C to
o
+55 C). Will withstand wind in excess of 150 mph
(240 kph), salt fog.
MATERIALS / FINISH
ꢀ Cast aluminum housing and stainless steel hardware.
ꢀ Electro-statically applied powdercoat of aviation orange paint.
ELECTRICAL SPECIFICATIONS
VA VA
OPERATING
WATTS
(TYP)
WATTS
(MAX)
(TYP) (MAX
VOLTAGE
120
120 VAC UNITS (60 Hz)
230 VAC UNITS (50 Hz)
50
65
10
18
61
73
230
13
17
Dialight Europe Ltd.
Dialight Corporation
Exning Road, Newmarket, England, CB8 0AX
Tel: +44 (0) 1638 666541 • Fax: +44 (0) 1638 561735
www.dialight-obstruction-lights.com
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778
www.dialight.com
A Subsidiary of Dialight PLC
MDTF860ATEX004_A