Instruction Sheet
Ribbon Cable Notcher
854449-[ ]
408-9515
30 DEC 09 Rev C
Retaining Ring
(2 Places)
Air Control
Valve
Upper Die Plate
Subassembly
To Air Supply
Cable Stop
Plate
Pressure Plate
Pressure Plate Dowel
Post (2 Places)
Die
Cable Support
Plate
Upper Tooling
Guard
Scrap Chute
NOTCH (mm [in.])
CABLE
CONNECTOR
TYPE
RIBBON
CABLE
NOTCHER
SIZE
(Number of
Positions)
WIDTH OF
WEB
LENGTH
CENTERLINE
(mm [in.])
SIZE
(AWG)
End
Feed Through
REMOVED
854449--1
854449--2
854449--3
854449--4
2.54 [.100]
2.54 [.100]
3.96 [.156]
2.54 [.100]
24--22
28--26
24--18
28--22
AMPMODU*, MT, MTE
2--28
2--28
2--24
2--28
1.27 [.050]
1.42 [.056]
1.80 [.071]
1.07 [.042]
AMPMODU, MT, MTE, MTA
10.92
[.43]
20.32 [.80]
MTA
MTA
Figure 1
— Pneumatic Applicator Frame Assembly 91112--2
(408--7763)
— 2700--lb Pneumatic Power Unit 312522--1
(409--5843) with Adapter Kit 854468--2 (408--9687)
1. INTRODUCTION
Ribbon Cable Notcher 854449--[ ] is used to separate
individual wires of ribbon cable for application onto
the connectors listed Figure 1.
— AMP--O--LECTRIC* Model “K” Terminating
Machine 2--565435--2 or 565435--5 (409--5128)
with Adapter Kit 854468--1 (408--9687)
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures are
not drawn to scale.
NOTE
i
Machine 565435 -5 is no longer available for new
applications, but can still be used for existing
applications.
NOTE
The ribbon cable notcher is designed to be used with
any one of the following power units:
i
— Manual Arbor Frame Assembly 58024--1
(408--6923)
For operation and adjustment of the power units, refer
to the instruction sheet (408--series) or customer
manual (409--series) included with the power unit.
This frame assembly is not recommended for use
on connectors with more than 14 positions.
NOTE
Reasons for reissue of this instruction sheet are
provided in Section 8, REVISION SUMMARY.
i
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
E2009 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
1 of 5
TE logo and Tyco Electronics are trademarks.
LOC B
*Trademark. Other products, logos, and company names used are the property of their respective owners.