IDT82P5088
Universal Octal T1/E1/J1 LIU
with Integrated Clock Adapter
FEATURES
•
•
Eight channel T1/E1/J1 long haul/short haul line interfaces
Supports HPS (Hitless Protection Switching) for 1+1 protection
without external relays
- Active level of transmit data (TDATA) and receive data (RDATA)
- Receiver or transmitter power down
- High impedance setting for line drivers
•
•
Receiver sensitivity exceeds -36 dB@772KHz and -43 dB@1024
KHz
Programmable T1/E1/J1 switchability allowing one bill of ma-
terial for any line condition
3.3 V and 1.8 V power supply with 5 V tolerant inputs
Meets or exceeds specifications in
- ANSI T1.102, T1.403 and T1.408
- ITU I.431, G.703,G.736, G.775 and G.823
- ETSI 300-166, 300-233 and TBR 12/13
- AT&T Pub 62411
Per channel software selectable on:
- Wave-shapingtemplatesforshorthaulandlonghaulLBO(LineBuild
Out)
- Line terminating impedance (T1:100 , J1:110 E1:75 120
- Adjustment of arbitrary pulse shape
- JA (jitter attenuator) position (receive path and transmit path)
- Single rail/dual rail system interfaces
- B8ZS/HDB3/AMI line encoding/decoding
- Active edge of transmit clock (TCLK) and receive clock (RCLK)
- PRBS (Pseudo Random Bit Sequence) generation and detection
15
with 2 -1 PRBS polynomials for E1
- QRSS(QuasiRandomSequenceSignals)generationanddetection
20
with 2 -1 QRSS polynomials for T1/J1
•
•
- 16-bit BPV (Bipolar Pulse Violation)/Excess Zero/PRBS or QRSS
error counter
- Analog loopback, Digital loopback, Remote loopback and Inband
loopback
Per channel cable attenuation indication
Adaptive receive sensitivity
Non-intrusive monitoring per ITU G.772 specification
Short circuit protection for line drivers
LOS (Loss Of Signal) & AIS (alarm indication signal) detection
JTAG interface
Supports serial control interface, Motorola and Intel Non-Multi-
plexed interfaces
Package:
Available in 256-pin BGA
Green package options available
•
•
•
•
•
•
•
•
•
DESCRIPTION
The IDT82P5088 is an eight port line intereface that can be configured
perporttoanycombinationofT1,E1orJ1ports.Inreceivepath,anadaptive
equalizer is integrated to remove the distortion introduced by the cable
attenuation. The IDT82P5088 also performs clock/data recovery, AMI/
B8ZS/HDB3 line decoding and detects and reports the LOS conditions. In
thetransmit path, there is an AMI/B8ZS/HDB3encoder, waveformshaper,
LBOs and jitter attenuator for each channel. The jitter attenuators in both
the transmit path and receive path can be disabled. The IDT82P5088 sup-
ports both single rail and dual rail system interfaces. To facilitate network
maintenance, a PRBS/QRSS generation/detection circuit is integrated in
each channel, and different types of loopbacks can be set on a per channel
basis. Fourdifferentkinds oflineterminatingimpedance, 75, 100110
and120areselectableonaperchannelbasis. Thechipalsoprovides
driver short-circuit protection and supports JTAG boundary scanning.
The IDT82P5088 can be used in SDH/SONET, WAN, routers, wireless
base stations, IADs, IMA, IMAPs, gateways, frame relay access devices,
CSU/DSU equipment, etc.
IDT and the IDT logo are trademarks of Integrated Device Technology, Inc.
© 2014 Integrated Device Technology, Inc.
1
July 30, 2014
VERSION 2 DSC-7216/-