INTERCONNECTS
Surface Mount Headers and Sockets
Single and Double Row
Series 800, 801,
802, 803
• Series 800 & 802 use MM #7007 pins.
See page 173 for details.
• Series 801 & 803 use MM #1304
receptacles and accept pin diameters
from 0,64-0,94 and 0,64 square
pins. See page 146 for details.
• Receptacles use Hi-Rel, 6 finger BeCu
#47 contact rated at 4.5 amps. See
page 211 for details.
Coplanarity 0,13. For Pin Counts >10
positions consult Technical Support.
• Insulators are high temp. thermoplastic.
Fig. 1
Ordering Information
800...001 Single Row Surface Mount Header
800-XX-0_ _-30-001000
Fig. 1
Fig. 2
Specify # of pins
03-64
802...001 Double Row Surface Mount Header
Coplanarity 0,13. For Pin Counts >10
positions consult Technical Support.
802-XX-0_ _-30-001000
Fig. 2
Specify # of pins
04-72
For RoHS compliance
XX= Plating Code
select
plating code.
See Below
SPECIFY PLATING CODE XX=
Pin Plating
10
90
40
0,25µm Au 5,08µm Sn/Pb 5,08µm Sn
801...001 Single Row Surface Mount Socket
Coplanarity 0,13. For Pin Counts >10
positions consult Technical Support.
801-XX-0 _ _-30-001000
Fig. 3
Fig. 4
Fig. 3
Specify # of pins
03-50
803...001 Double Row Surface Mount Socket
803-XX-_ _ _-30-001000
Specify # of pins
004-100
For RoHS compliance
XX= Plating Code
See Below
select
plating code.
Coplanarity 0,13. For Pin Counts >10
positions consult Technical Support.
SPECIFY PLATING CODE XX=
Sleeve (Pin)
13
93
43
0,25µm Au
0,76µm Au
5,08µm Sn/Pb
5,08µm Sn
Fig. 4
0,76µm Au
0,76µm Au
Contact (Clip)
www.mill-max.com
516-922-6000
78.1