78P2343JAT
3-port E3/DS3/STS-1 LIU
with Jitter Attenuator
PRELIMINARY DATASHEET
JULY 2003
DESCRIPTION
FEATURES
The 78P2343JAT is
a
low-power, 3-port
•
Transmit and receive interfaces for E3, DS3 and
DS3/E3/STS1 Line Interface Unit (LIU) with
integrated Jitter Attenuator (JAT). It includes clock
recovery and transmitter pulse shaping functions for
applications using 75-ohm coaxial cable at distances
up to 1350 feet. These applications include
DSLAMs, T1,3/E1,3 digital multiplexers, SONET
Add/Drop multiplexers, PDH equipment, DS3 to
Fiber optic and microwave modems and ATM WAN
access for routers and switches.
STS-1 applications
•
Designed for use with 75 ohm coaxial cable up
to 1350 ft long end-to-end or up to 900 ft long
from a DS3 cross-connect
•
•
•
Receives DS3-high and DSX3 monitor signals
Local and Remote loopback
Selectable B3ZS/HDB3 ENDEC with line code
violation detector
•
•
Standards-based LOS function
Optional serial-port based mode selection and
channel status monitoring
The receiver recovers clock and data from a B3ZS
or HDB3 coded AMI signal. It can compensate for
over 12dB of cable and 6dB of flat loss. The
transmitter generates a signal that meets the
•
•
Receiver AGC corrects for up to 6dB of flat loss
Adaptive digital clock recovery (uses line-rate
reference clock input)
standard pulse shape requirements.
It has a
B3ZS/HDB3 ENDEC with a receive line code
violation detector, a loop-back mode, an input
receive MUX that can select a redundant channel, a
clock polarity selection mode, and the ability to
receive a DSX3 monitor signal.
•
•
Receive output clock maintains nominal line-rate
frequency at all times
Fully integrated Jitter Attenuation function
provided for all line rates (no external VCXO
required)
•
Jitter Attenuator configurable for transmit or
receive path
STANDARDS
•
Jitter Tolerance: Telcordia GR-499-CORE [DS3]
and GR-253-CORE [STS1], ITU-T G.823 [E3]
and G.824 [DS3]
•
•
Transmit line fault monitor
Requires no external current-setting resistor or
loop filter components
•
•
Loss of Signal: ITU-T G.775
•
•
Single 3.3V supply operation
Jitter Transfer: ETSI TBR-24 1997 [E3];
Telcordia GR-499-CORE [DS3] and GR-253-
CORE [DS3/STS1]
Available in 100-pin Exposed Pad JEDEC LQFP
BLOCK DIAGRAM
Controls Flags
RLBK
LBO E3 DS3
Transmit
TXNW
TXEN
Monitor
TPOS
TNEG
TCLK
B3ZS /
HDB3
LOUTP
LOUTN
Pulse
Shaper
Encoder
Attenuator
Jitter
ENDEC
Attenuator
RPOS
LINP
LINN
B3ZS /
AGC
Data
Detector
Adaptive
Equalizer
HDB3
RNEG
RCLK
Decoder
MON
TCLKP
RCLKP
Power
Distribution
Signal
Detector
Clock
Recovery
LOS
LLBKA
LLBKB
PDTX PDRX
CKREF
Signals from
Adjacent Port
Each Channel
CS
SCK
SDI
Master
Bias
Generator
Control
Registers
CKREF
SDO
- 1 -