Linear Voltage Regulator – 7805AC
Rev 1.0
19/04/19
Positive Fixed 5V Voltage Regulator in bare die form
Description
Features:
The 7805AC 5V fixed 3-terminal positive voltage
regulator delivers up to 1.5A of output current with
adequate heat-sinking. The device is equipped with
internal limiting, safe-area compensation + thermal
shutdown features for overload immunity. 7805AC can
be used with external components to obtain adjustable
voltages or currents & can also be used as the power-
pass element in precision high-current voltage
regulators. No external components are needed other
than to enhance performance or increase design
flexibility.
±2% VOUT tolerance at 25°C
Greater than 1A output current capability
Internal thermal overload protection
Internal short-circuit current limit
Output capacitor not essential for stability
Full Military temperature range
Negative voltage complement is 7905AC.
Ordering Information
Die Dimensions in µm (mils)
The following part suffixes apply:
1400 (55)
No suffix - MIL-STD-883 /2010B Visual Inspection
“H” - MIL-STD-883 /2010B Visual Inspection
+ MIL-PRF-38534 Class H LAT
“K” - MIL-STD-883 /2010A Visual Inspection (Space)
+ MIL-PRF-38534 Class K LAT
LAT = Lot Acceptance Test.
For further information on LAT process flows see below.
www.siliconsupplies.com\quality\bare-die-lot-qualification
Supply Formats:
Mechanical Specification
Default – Die in Waffle Pack (100 per tray capacity)
Sawn Wafer on Tape – On request
Unsawn Wafer – On request
1400 x1900
Die Size (Unsawn)
µm
mils
55 x 75
230 x 230
Minimum Bond Pad Size
9.05 x 9.05
µm
mils
280 (±20)
Die Thickness
µm
mils
Tape & Reel – On request
11.02 (±0.79)
Top Metal Composition
Back Metal Composition
Al 1%Si 1.1µm
Ti/Ni/Ag 1.2 µm
In Metal or Ceramic package – On request
Page 1 of 5
www.siliconsupplies.com