Product Datasheet
ELECTRONIC WINDSHIELD WIPER SWITCHES
Features and Benefits
• Push-to-Wash Capable (2-3 wipes after released)
• Intensity settings are not load-sensitive
• Conform to SAE J1455, J112a and J234
75600-04
• Power supply circuit protected from noise, reverse polarity,
field decay, RF radiation, and load dump
• Low Heat Generation
Specifications Overview
Mounting:
Hex Nut through 7/16 (11.11mm)
28 Panel Hole
Description
Housing:
Zinc Diecast
Littelfuse Windshield Wiper Switches are designed for in-cabin
wiper control. Their mounting, body, and actuator features are
designed for ease-of-use and extended product lifecycle.
Circuitry:
Negative Ground Only
Ingress Protections:
O-Ring in Shaft
See below for applicable part numbers
Applications
• Construction Equipment
The Electronic Windshield Wiper Switches ensure dependable
control of windshield wipers on heavy duty vehicles. They are
designed with intermittent delay feature for permanent magnet
electric wiper motors. Switches are not compatible with self-
parking wiper motors; a park-signal is required from the wiper
motor.
• Material Handling Equipment
• Commercial Vehicles
• Agricultural Equipment
Web Resources
Download 2D print and technical resources at:
Ordering Information
littelfuse.com/electronicwipers
INGRESS
PROTECTION
PART
NUMBER
CIRCUITRY
VOLTAGE RATING
POSITIONS
TERMINATION
Controls 1 Motor
(with Dynamic Parking)
3A at 12V DC (Wash),
15A at 12V DC (Wipe)
8 16AWG leads terminated in Aptiv Connector
#2965977
75600 *
O-Ring in Shaft 4: Off - Intermittent - Low - High
6 18AWG leads terminated in Aptiv Connector
#2977042 and 4 18AWG leads terminated in Aptiv
Connector #6294544
Controls 2 Motors
3A at 16V DC (Wash),
6: Off - Long Delay - Int Delay -
O-Ring in Shaft
75600-01 *
(with or without Dynamic Parking) 10A at 16V DC (Continuous)
Short Delay - Low - High
Controls 1 Motor
(with Dynamic Parking)
Controls 1 Motor
3A at 16V DC (Wash),
15A at 16V DC (Continuous)
3A at 16V DC (Wash),
6: Off - Long Delay - Int Delay - 6 16AWG leads terminated in Aptiv Connector
75600-02 *
75600-04 *
O-Ring in Shaft
O-Ring in Shaft
Short Delay - Low - High
6: Off - Long Delay - Int Delay -
Short Delay - Low - High
#2977042
6 16AWG stripped leads per SAE J1128
(with Dynamic Parking)
15A at 16V DC (Continuous)
4 16AWG leads terminated in Aptiv Connector
#6294544 and 4 16AWG leads terminated in Aptiv
Connector #2977048
6 16AWG leads terminated in Dill Connector
#059074
6 18AWG leads terminated in Aptiv Connector
#2977042 and 4 18AWG leads terminated in Aptiv
Connector #6294544
Controls 1 Motor
3A at 16V DC (Wash),
6: Off - Long Delay - Int Delay -
Short Delay - Low - High
75600-05
75600-07 *
75600-20
O-Ring in Shaft
O-Ring in Shaft
O-Ring in Shaft
(with Dynamic Parking)
15A at 16V DC (Continuous)
Controls 1 Motor
(with Dynamic Parking)
3A at 16V DC (Wash),
15A at 16V DC (Continuous)
6: Off - Long Delay - Int Delay -
Short Delay - Low - High
Controls 2 Motors
(with or without Dynamic Parking) 10A at 16V DC (Continuous)
3A at 16V DC (Wash),
6: Off - Long Delay - Int Delay -
Short Delay - Low - High
Controls 1 Motor
(with or without Dynamic Parking) 15A at 16V DC (Continuous)
Controls 2 Motors 3A at 16V DC (Wash),
(with or without Dynamic Parking) 10A at 16V DC (Continuous)
3A at 16V DC (Wash),
6: Off - Long Delay - Int Delay - 6 18AWG leads terminated in TE Connectivity
75600-25
75600-32
O-Ring in Shaft
O-Ring in Shaft
Short Delay - Low - High
Connector #640585-1
6: Off - Long Delay - Int Delay - 9 18AWG leads terminated in Aptiv Connector
Short Delay - Low - High
#15326915
8 18AWG leads terminated in Aptiv Connector
#2965972 and 1 18AWG lead terminated in Aptiv
Connector #8905650
Controls 2 Motors
(without Dynamic Parking)
3A at 16V DC (Wash),
10A at 16V DC (Continuous)
5: Off - Int Delay - Short Delay -
Low - High
75601-14 *
None
6 18AWG leads terminated in Aptiv Connector
#2977042 and 4 18AWG leads terminated in Aptiv
Connector #6294544
Controls 2 Motors
3A at 32V DC (Wash),
5: Off - Int Delay - Short Delay -
Low - High
75602-02
75602-04 *
75603-08
75603-09
None
None
None
None
(with or without Dynamic Parking) 10A at 32V DC (Continuous)
Controls 1 Motor
(with Dynamic Parking)
3A at 36V DC (Wash),
10A at 36V DC (Continuous)
5: Off - Int Delay - Short Delay -
Low - High
5 16AWG stripped leads per SAE J1128
6 18AWG leads terminated in Aptiv Connector
#2977042 and 4 18AWG leads terminated in Aptiv
Connector #6294544
Controls 2 Motors
(with or without Dynamic Parking) 10A at 16V DC (Continuous)
3A at 16V DC (Wash),
5: Off - Int Delay - Short Delay -
Low - High
Controls 2 Motors
(with or without Dynamic Parking) 10A at 16V DC (Continuous)
3A at 16V DC (Wash),
5: Off - Int Delay - Short Delay - 9 18AWG leads terminated in TE Connectivity
Low - High
Connector #1-480707-0
* Box and Retail Blister Pack Available
littelfuse.com
© 2019 Littelfuse Commercial Vehicle Products
Rev: 021119
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
