74VHCT9273FT
CMOS Digital Integrated Circuits Silicon Monolithic
74VHCT9273FT
1. Functional Description
•
Octal D-Type Flip-Flop with Clear
2. General
The 74VHCT9273FT is an advanced high speed CMOS OCTAL D-TYPE FLIP FLOP fabricated with silicon gate
C2MOS technology.
It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS
low power dissipation.
The input voltage are compatible with TTL output voltage.
This device may be used as a level converter for interfacing 3.3 V to 5 V system.
Information signals applied to D inputs are transferred to the Q outputs on the positive going edge of the clock
pulse.
When the CLR input is held "L", the Q outputs are at a low logic level independent of the other inputs.
The CLR input and CK input have hysteresis between the positive-going and negative-going thresholds. Thus
the 74VHCT9273FT is capable of squaring up transitions of slowly changing input signals and provides an
improved noise immunity.
It is easy to wire on the board because Input terminals are at the opposite side of output terminals.
An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply
voltage.
3. Features
(1) AEC-Q100 (Rev. H) (Note 1)
(2) Wide operating temperature range: Topr = -40 to 125
(3) High speed: fMAX = 185 MHz (typ.) at VCC = 5.0 V
(4) Low power dissipation: ICC = 2.0 µA (max) at Ta = 25
(5) Compatible with TTL inputs: VIL = 0.5 V (max)
VIH = 2.1 V (min)
(6) Power-down protection is provided on all inputs.
(7) Balanced propagation delays: tPLH ≈ tPHL
(8) Function compatible with 74VHC273.
(9) Input terminals are at the opposite side of output terminals
Note 1: This device is compliant with the reliability requirements of AEC-Q100. For details, contact your Toshiba sales
representative.
Start of commercial production
2014-12
©2016 Toshiba Corporation
2016-08-05
Rev.2.0
1