74VHC9273FT
CMOS Digital Integrated Circuits Silicon Monolithic
74VHC9273FT
1. Functional Description
•
Octal D-Type Flip-Flop with Clear
2. General
The 74VHC9273FT is an advanced high speed CMOS OCTAL D-TYPE FLIP FLOP fabricated with silicon gate
C2MOS technology.
It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS
low power dissipation.
InformationsignalsappliedtoDinputsaretransferredtotheQoutputsonthepositivegoingedgeoftheclockpulse.
When the CLR input is held "L", the Q outputs are at a low logic level independent of the other inputs.
The CLR input and CK input have hysteresis between the positive-going and negative-going thresholds. Thus
the74VHC9273FTiscapableofsquaringuptransitionsofslowlychanginginputsignalsandprovidesanimproved
noise immunity.
It is easy to wire on the board because Input terminals are at the opposite side of Output terminals.
An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply
voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up.
This circuit prevents device destruction due to mismatched supply and input voltages.
3. Features
(1) AEC-Q100 (Rev. H) (Note 1)
(2) Wide operating temperature range: Topr = -40 to 125
(3) High speed: fMAX = 195 MHz (typ.) at VCC = 5.0 V
(4) Low power dissipation: ICC = 4.0 µA (max) at Ta = 25
(5) Power-down protection is provided on all inputs.
(6) Balanced propagation delays: tPLH ≈ tPHL
(7) Wide operating voltage range: VCC(opr) = 2.0 V to 5.5 V
(8) Function compatible with 74VHC273
(9) Input terminals are at the opposite side of Output terminals
Note 1: This device is compliant with the reliability requirements of AEC-Q100. For details, contact your Toshiba sales
representative.
4. Packaging
TSSOP20B
Start of commercial production
2014-06
©2016-2018
2018-06-18
Rev.4.0
1
Toshiba Electronic Devices & Storage Corporation