April 1994
Revised April 1999
74VHC4051 • 74VHC4052 • 74VHC4053
8-Channel Analog Multiplexer • Dual 4-Channel Analog
Multiplexer • Triple 2-Channel Analog Multiplexer
multiplexers. The binary code placed on the A, and B
select lines determine which switch in each 4 channel sec-
tion is “on”, connecting one of the four inputs in each sec-
tion to its common output. This enables the implementation
General Description
These multiplexers are digitally controlled analog switches
implemented in advanced silicon-gate CMOS technology.
These switches have low “on” resistance and low “off” leak-
of a 4-channel differential multiplexer.
ages. They are bidirectional switches, thus any analog
VHC4053: This device contains 6 switches whose outputs
input may be used as an output and vice-versa. Also these
are connected together in pairs, thus implementing a triple
switches contain linearization circuitry which lowers the
2 channel multiplexer, or the equivalent of 3 single-pole-
“on” resistance and increases switch linearity. These
double throw configurations. Each of the A, B, or C select
devices allow control of up to ±6V (peak) analog signals
lines independently controls one pair of switches, selecting
with digital control signals of 0 to 6V. Three supply pins are
one of the two switches to be “on”.
provided for VCC, ground, and VEE. This enables the con-
nection of 0–5V logic signals when VCC = 5V and an analog
Features
input range of ±5V when VEE = 5V. All three devices also
■ Wide analog input voltage range: ±6V
have an inhibit control which when high will disable all
■ Low “on” resistance: 50 typ. (VCC–VEE = 4.5V)
30 typ. (VCC–VEE = 9V)
switches to their off state. All analog inputs and outputs
and digital inputs are protected from electrostatic damage
by diodes to VCC and ground.
■ Logic level translation to enable 5V logic with ±5V ana-
log signals
VHC4051: This device connects together the outputs of 8
switches, thus achieving an 8 channel Multiplexer. The
binary code placed on the A, B, and C select lines deter-
mines which one of the eight switches is “on”, and con-
nects one of the eight inputs to the common output.
■ Low quiescent current: 80 µA maximum
■ Matched switch characteristic
■ Pin and function compatible with the 74HC4051/ 4052/
4053
VHC4052: This device connects together the outputs of 4
switches in two sets, thus achieving a pair of 4-channel
Ordering Code:
Order Number Package Number
Package Description
74VHC4051M
74VHC4051WM
74VHC4051MTC
74VHC4051N
M16A
M16B
MTC16
N16E
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300” Wide
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide
74VHC4052M
74VHC4052WM
74VHC4052MTC
74VHC4052N
M16A
M16B
MTC16
N16E
74VHC4053M
74VHC4053WM
74VHC4053MTC
74VHC4053N
M16A
M16B
MTC16
N16E
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
© 1999 Fairchild Semiconductor Corporation
DS011674.prf
www.fairchildsemi.com