September 1995
Revised April 1999
74VHC112
Dual J-K Flip-Flops with Preset and Clear
Simultaneous LOW signals on PR and CLR force both Q
and Q HIGH.
General Description
The VHC112 is an advanced high speed CMOS device
fabricated with silicon gate CMOS technology. It achieves
the high-speed operation similar to equivalent Bipolar
Schottky TTL while maintaining the CMOS low power dissi-
pation.
An input protection circuit ensures that 0V to 7V can be
applied to the input pins without regard to the supply volt-
age. This device can be used to interface 5V to 3V systems
and two supply systems such as battery backup. This cir-
cuit prevents device destruction due to mismatched supply
and input voltages.
The VHC112 contains two independent, high-speed JK flip-
flops with Direct Set and Clear inputs. Synchronous state
changes are initiated by the falling edge of the clock. Trig-
gering occurs at a voltage level of the clock and is not
directly related to transition time. The J and K inputs can
change when the clock is in either state without affecting
the flip-flop, provided that they are in the desired state dur-
ing the recommended setup and hold times relative to the
falling edge of the clock. The LOW signal on PR or CLR
prevents clocking and forces Q and Q HIGH, respectively.
Features
■ High speed: fMAX = 200 MHz (typ) at VCC = 5.0V
■ Low power dissipation: ICC = 2 µA (max) at TA = 25°C
■ High noise immunity: VNIH = VNIL = 28% VCC (min)
■ Power down protection is provided on all inputs
■ Pin and function compatible with 74HC112
Ordering Code:
Order Number Package Number
Package Description
74VHC112M
74VHC112SJ
74VHC112MTC
74VHC112N
M16A
M16D
MTC16
N16E
16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow
16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Connection Diagram
Pin Descriptions
Pin Names
Description
J1, J2, K1, K2
CLK1, CLK2
CLR1, CLR2
PR1, PR2
Data Inputs
Clock Pulse Inputs (Active Falling Edge)
Direct Clear Inputs (Active LOW)
Direct Preset Inputs (Active LOW)
Outputs
Q1, Q2, Q1, Q2
© 1999 Fairchild Semiconductor Corporation
DS012123.prf
www.fairchildsemi.com