January 2000
Revised January 2000
74VCX162373
Low Voltage 16-Bit Transparent Latch
with 3.6V Tolerant Inputs and Outputs
and 26Ω Series Resistors in Outputs
General Description
Features
■ 1.65V–3.6V VCC supply operation
The VCX162373 contains sixteen non-inverting latches
with 3-STATE outputs and is intended for bus oriented
applications. The device is byte controlled. The flip-flops
appear to be transparent to the data when the Latch enable
(LE) is HIGH. When LE is LOW, the data that meets the
setup time is latched. Data appears on the bus when the
Output Enable (OE) is LOW. When OE is HIGH, the out-
puts are in a high impedance state.
■ 3.6V tolerant inputs and outputs
■ 26Ω series resistors in outputs
■ tPD (In to On)
3.3 ns max for 3.0V to 3.6V VCC
4.5 ns max for 2.3V to 2.7V VCC
9.0 ns max for 1.65V to 1.95V VCC
The VCX162373 is also designed with 26Ω resistors in the
outputs. This design reduces line noise in applications
such as memory address drivers, clock drivers and bus
transceivers/transmitters.
■ Power-off high impedance inputs and outputs
■ Support live insertion and withdrawal (Note 1)
■ Static Drive (IOH/IOL
)
The 74VCX162373 is designed for low voltage (1.65V to
3.6V) VCC applications with I/O compatibility up to 3.6V.
±12 mA @ 3.0V VCC
±8 mA @ 2.3V VCC
±3 mA @ 1.65V VCC
The 74VCX162373 is fabricated with an advanced CMOS
technology to achieve high speed operation while maintain-
ing low CMOS power dissipation.
■ Uses patented noise/EMI reduction circuitry
■ Latch-up performance exceeds 300 mA
■ ESD performance:
Human body model > 2000V
Machine model > 200V
Note 1: To ensure the high-impedance state during power up or power
down, OE should be tied to V
through a pull-up resistor; the minimum
CC
value of the resistor is determined by the current-sourcing capability of the
driver.
Ordering Code:
Package
Ordering Number
Number
Package Description
74VCX162373MTD
MTD48
48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Logic Symbol
Pin Descriptions
Pin Names
Description
OEn
Output Enable Input (Active LOW)
LEn
Latch Enable Input
Inputs
I0–I15
O0–O15
Outputs
© 2000 Fairchild Semiconductor Corporation
DS500236
www.fairchildsemi.com