74LVCH245A
OCTAL BUS TRANSCEIVER WITH BUS HOLD / 3 STATE OUTPUTS
Description
Pin Assignments
The 74LVCH245A is an octal transceiver designed for asynchronous
communication between data buses. The device transmits data from
the A bus to the B bus or from the B bus to the A bus, depending on
the logic level at the direction-control (DIR) input. The output-enable
(OE) pin can be used to disable the device so the buses effectively are
isolated.
The device is designed for operation with a power supply range of
1.65V to 3.6V.
The inputs are tolerant to 5.5V allowing this device to be used in a
mixed voltage environment. The device is fully specified for partial
power down applications using IOFF. The IOFF circuitry disables the
output preventing damaging current backflow when the device is
powered down.
Bus hold circuitry holds unused or undriven inputs at a high or low
logic state. The use of external pull-up or pull down resistors is not
recommended.
Applications
•
•
•
•
General Purpose Logic
Bus Driving
Features
Power Down Signal Isolation
Wide array of products such as:
•
•
•
•
•
•
Supply Voltage Range from 1.65V to 3.6V
Sinks or Sources 24ma at VCC = 3V
CMOS Low Power Consumption
PCs, Notebooks, Netbooks, Ultrabooks
Networking Computer Peripherals, Hard Drives, CD/DVD
ROM
I
OFF Supports Partial Power Down Operation
Inputs or Outputs Accept Up to 5.5V
TV, DVD, DVR, Set Top Box
Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage
Applications
•
•
Schmitt Trigger Action at All Inputs
Typical VOLP (Quiet Output Ground Bounce) Less Than 0.8V with
VCC = 3.3V and TA = +25°C
•
•
Typical VOHV (Quiet Output dynamic VOH) Greater than 2.0V with
VCC = 3.3V and TA = +25°C
ESD Protection Tested per JESD 22
Exceeds 200-V Machine Model (A115)
Exceeds 2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
•
•
Latch-Up Exceeds 250mA per JESD 78, Class I
All devices are:
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free,
"Green" and Lead-Free.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 10
www.diodes.com
July 2014
© Diodes Incorporated
74LVCH245A
Document number: DS35891 Rev. 1 - 2