74LVC374A
OCTAL D-TYPE FLIP-FLOP WITH 3 STATE OUTPUTS
Description
Pin Assignments
The 74LVC374A provides eight edge-triggered D-type flip-flops
featuring 3-state outputs designed specifically for driving highly
capacitive or relatively low-impedance loads. These devices are
particularly suitable for implementing buffer registers, input/output (I/O)
ports, bidirectional bus drivers, and working registers. On the positive
transition of the clock (CLK) input, the Q outputs are set to the logic
levels set up at the data (D) inputs. A buffered output-enable (OE)
input can be used to place the eight outputs in either a normal logic
state (high or low logic levels) or the high-impedance state. In the
high-impedance state, the outputs neither load nor drive the bus lines
significantly. The high-impedance state and increased drive provide
the capability to drive bus lines without interface or pullup components.
OE does not affect internal operations of the latch. Old data can be
retained or new data can be entered while the outputs are in the high-
impedance state.
(Top View )
)
(
Top Transparent View
terminal 1
index area
1
20
19
18
17
16
15
Vcc
OE
1Q
1D
2
3
4
5
6
7
8Q
8D
7D
19
18
17
16
15
14
13
12
2
3
4
5
6
7
8
9
1Q
1D
2D
2Q
3Q
3D
4D
4Q
8Q
8D
7D
7Q
6Q
6D
5D
5Q
2D
2Q
7Q
6Q
6D
3Q
14
13
12
11
3D
4D
8
9
5D
4Q
5Q
CLK
10
GND
QFN-20
TSSOP-20
The ‘374A is functionally identical to the ‘574A, but the’574 has a
different pin arrangement.
Applications
The device is designed for operation with a power supply range of
1.65V to 3.6V. The device is fully specified for partial power down
•
•
•
•
General Purpose Logic
Bus Driving
applications using IOFF
.
Power Down Signal Isolation
Wide array of products such as:
PCs, Notebooks, Netbooks, Ultrabooks
Features
Networking Computer Peripherals, Hard Drives, CD/DVD
•
•
•
•
•
•
Supply Voltage Range from 1.65V to 3.6V
ROM
Sinks or Sources 24ma at VCC = 3V
CMOS Low Power Consumption
TV, DVD, DVR, Set Top Box
I
OFF Supports Partial Power Down Operation
Inputs or Outputs Accept Up to 5.5V
Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage
Applications
•
•
Schmitt Trigger Action at All Inputs
Typical VOLP (Quiet Output Ground Bounce) Less Than 0.8V with
VCC = 3.3V and TA = +25°C
•
•
Typical VOHV (Quiet Output dynamic VOH) Greater than 2.0V with
VCC = 3.3V and TA = +25°C
ESD Protection Tested per JESD 22
Exceeds 200-V Machine Model (A115)
Exceeds 2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
•
•
Latch-Up Exceeds 250mA per JESD 78, Class I
All devices are:
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free,
"Green" and Lead-Free.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 10
www.diodes.com
June 2014
© Diodes Incorporated
74LVC374A
Document number: DS35895 Rev. 1 - 2