74LVC245A
Octal Bus Transceiver with 3-State Outputs
GENERAL DESCRIPTION
FEATURES
The 74LVC245A is an octal bus transceiver with 3-state
outputs, which can accept supply voltage range from
1.65V to 3.6V. The device is mainly used for
asynchronous communication between data buses.
Both 3.3V and 5V devices can drive inputs, enabling
this device to operate as translator in a mixed 3.3V and
5V system environment.
● Wide Supply Voltage Range: 1.65V to 3.6V
● Inputs Accept Voltages up to 5.5V
● +24mA/-24mA Output Current
● All Ports Support Mixed Mode Signal Operation
● Support Partial Power-Down Mode
● -40℃ to +125℃ Operating Temperature Range
● Available in Green SSOP-20 and TSSOP-20
Packages
The An and Bn are 8-bit data input-output ports, DIR is
�����
the direction control input and OE is the output enable
input. When DIR is set high, it allows transmission from
An to Bn. When DIR is set low, it allows transmission
APPLICATIONS
�����
Medical System
from Bn to An. OE can be used to make the outputs
Computing: Server, PC and Notebook
Telecom System
disabled so that the buses are effectively isolated.
�����
OE should be connected to VCC by using a pull-up
Industrial System
resistor to ensure the high-impedance state in the
period of power-up or power-down, and the minimum
resistance depends on the current-sinking capability of
the driver.
LOGIC DIAGRAM
19
This device is highly suitable for partial power-down
applications using power-off leakage current (IOFF) circuit.
When the device is powered down, the current backflow
will be prevented from passing through the device.
OE
1
DIR
2
A1
18
B1
FUNCTION TABLE
3
A2
CONTROL INPUT
INPUT/OUTPUT
17
B2
�����
DIR
L
An
An = Bn
Inputs
Z
Bn
Inputs
Bn = An
Z
OE
L
L
H
H
X
9
A8
H = High Voltage Level
L = Low Voltage Level
Z = High-Impedance State
X = Don’t Care
11
B8
SG Micro Corp
JUNE 2023 – REV. A
www.sg-micro.com