74LVC244A
OCTAL BUFFER/LINE DRIVER WITH 3 STATE OUTPUTS
Description
Pin Assignments
The 74LVC244A provides two 4-bit line drivers with separate output-
enable (OE) inputs. When OE is low, the device passes data from the
A inputs to the Y outputs. When OE is high, the outputs are in the
high-impedance state.
The device is designed for operation with a power supply range of
1.65V to 3.6V.
The inputs are tolerant to 5.5V allowing this device to be used in a
mixed voltage environment. The device is fully specified for partial
power down applications using IOFF. The IOFF circuitry disables the
output preventing damaging current backflow when the device is
powered down.
Features
•
•
•
•
•
•
Supply Voltage Range from 1.65V to 3.6V
Sinks or Sources 24ma at VCC = 3V
CMOS Low Power Consumption
Applications
I
OFF Supports Partial - Power Down Operation
•
•
•
•
General Purpose Logic
Inputs or Outputs Accept up to 5.5V
Bus Driving
Inputs can be Driven by 3.3V or 5V Allowing for Mixed Voltage
Applications
Power Down Signal Isolation
Wide array of products such as:
•
•
Schmitt Trigger Action at All Inputs
PCs, Notebooks, Netbooks, Ultrabooks
Networking Computer Peripherals, Hard Drives, CD/DVD
ROM
Typical VOLP (Quiet Output Ground Bounce) Less than 0.8V with
VCC = 3.3V and TA = +25°C
•
•
Typical VOHV (Quiet Output Dynamic VOH) Greater than 2.0V
with VCC = 3.3V and TA = +25°C
TV, DVD, DVR, Set Top Box
ESD Protection Tested per JESD 22
Exceeds 200-V Machine Model (A115)
Exceeds 2000-V Human Body Model (A114)
Exceeds 1000-V Charged Device Model (C101)
•
•
Latch-Up Exceeds 250mA per JESD 78, Class I
All devices are:
Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free,
"Green" and Lead-Free.
3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 10
www.diodes.com
July 2014
© Diodes Incorporated
74LVC244A
Document number: DS35888 Rev. 1 - 2