November 1992
Revised March 2005
74ABT574
Octal D-Type Flip-Flop with 3-STATE Outputs
General Description
Features
The ABT574 is an octal flip-flop with a buffered common
Clock (CP) and a buffered common Output Enable (OE).
The information presented to the D inputs is stored in the
flip-flops on the LOW-to-HIGH Clock (CP) transition.
■ Inputs and outputs on opposite sides of package
allowing easy interface with microprocessors
■ Useful as input or output port for microprocessors
■ Functionally identical to ABT374
The device is functionally identical to the ABT374 but has
broadside pinouts.
■ 3-STATE outputs for bus-oriented applications
■ Output sink capability of 64 mA, source capability
of 32 mA
■ Guaranteed output skew
■ Guaranteed multiple output switching specifications
■ Output switching specified for both 50 pF and
250 pF loads
■ Guaranteed simultaneous switching, noise level and
dynamic threshold performance
■ Guaranteed latchup protection
■ High impedance glitch free bus loading during entire
power up and power down cycle
■ Non-destructive hot insertion capability
Ordering Code:
Order Number Package Number
Package Description
74ABT574CSC
74ABT574CSJ
74ABT574CMSA
74ABT574CMTC
M20B
M20D
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
MSA20
MTC20
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Pb-Free package per JEDEC J-STD-020B.
Pin Descriptions
Connection Diagram
Pin Names
Description
D0–D7
CP
Data Inputs
Clock Pulse Input (Active Rising Edge)
3-STATE Output Enable Input (Active LOW)
3-STATE Outputs
OE
O0–O7
© 2005 Fairchild Semiconductor Corporation
DS011511
www.fairchildsemi.com