EVALUATION KIT AVAILABLE
71M6543FT/71M6543HT/
71M6543GT/71M6543GHT
Energy Meter ICs
General Description
Benefits and Features
●ꢀ SoCꢀIntegrationꢀandꢀUniqueꢀIsolationꢀTechniqueꢀ
Reduces BOM Cost Without Sacrificing Performance
• 0.1% Typical Accuracy Over 2000:1 Current
Range
The 71M6543FT/71M6543HT/71M6543GT/71M6543GHT
(71M654xT) are 4th-generation three-phase metering
systems-on-chips (SoCs) with a 5MHz, 8051-compat-
ible MPU core, low-power RTC with digital temperature
compensation, flash memory, and LCD driver. Our Single
• Exceeds IEC 62053/ANSI C12.20 Standards
• Four-Quadrant Metering
•ꢀ 46-64HzꢀLineꢀFrequencyꢀRangeꢀwithꢀtheꢀSame
Calibration
• Phase Compensation (±10º)
• Independent 32-Bit Compute Engine
• 64KB Flash, 5KB RAM (71M6543FT/71M6543HT)
• 128KB Flash, 5KB RAM (71M6543GT/71M6543GHT)
• Built-In Flash Security
• SPI Interface with Flash Program Capability
• Up to Four Pulse Outputs with Pulse Count
• 8-Bit MPU (80515), Up to 5 MIPS
• Full-Speed MPU Clock in Brownout Mode
• LCD Driver Allows Up to 6 Commons/Up to
56 Pins
®
Converter Technology with a 22-bit delta-sigma ADC,
seven analog inputs, digital temperature compensation,
precision voltage reference, and a 32-bit computation
engine (CE) support a wide range of metering applications
with very few external components.
The 71M654xT devices support optional interfaces to the
Maxim Integrated 71M6x03 series of isolated sensors
offering BOM cost reduction, immunity to magnetic tam-
per, and enhanced reliability. Other features include an
SPI interface, advanced power management, ultra-low-
power operation in active and battery modes, 5KB shared
RAM, and 64KB/128KB flash memory that can be pro-
grammed in the field with code and/or data during meter
operation and the ability to drive up to six LCD segments
per SEG driver pin. High processing and sampling rates
combined with differential inputs offer a powerful platform
for residential meters.
• Up to 51 Multifunction DIO Pins
• Hardware Watchdog Timer (WDT)
• Two UARTs for IR and AMR
• IR LED Driver with Modulation
2
• I C/MICROWIRE® EEPROM Interface
●ꢀ InnovativeꢀIsolationꢀTechnologyꢀ(Requiresꢀ
Companion 71M6xxx Sensor, also from Maxim
Integrated) Eliminates Current Transformers
• Four Current Sensor Inputs with Selectable
Differential Mode
A complete array of code development tools, demonstra-
tion code, and reference designs enable rapid develop-
ment and certification of meters that meet all ANSI and
IEC electricity metering standards worldwide.
• Selectable Gain of 1 or 8 for One Current Input to
Support Neutral Current Shunt
• High-Speed Wh/VARh Pulse Outputs with
Programmable Width
The 71M654xT family operates over the industrial tem-
perature range and comes in a 100-pin lead(Pb)-free
LQFP package.
●ꢀ DigitalꢀTemperatureꢀCompensationꢀImprovesꢀSystemꢀ
Performance
Applications
●ꢀ Three-PhaseꢀResidential,ꢀCommercial,ꢀandꢀIndustrial
• Metrology Compensation
• Accurate RTC for TOU Functions with Automatic
Temperature Compensation for Crystal in All
Power Modes
Energy Meters
●ꢀ PowerꢀManagementꢀExtendsꢀBatteryꢀLifeꢀDuringꢀ
Power Outages
Ordering Information and Typical Operating Circuit appear
at end of data sheet.
• Three Battery-Backup Modes
- Brownout Mode (BRN)
- LCD Mode (LCD)
- Sleep Mode (SLP)
Wake-Up on Pin Events and Wake-On Timer
• 1µA in Sleep Mode
Single Converter Technology is a registered trademark of
Maxim Integrated Products, Inc.
•
MICROWIRE is a registered trademark of National
Semiconductor Corp.
19-6720; Rev 7; 12/15