F-209 SUPPLEMENT
MICD–038–06.00–STR–STL–4
MICD–019–06.00–TTL–STL–3
MICD, SQCD,
0,635mm HIGH SPEEDCABLE6QCD SERIES
Increased
™
Insertion
Depth
MICD Mates with:
MIS, MIT
SPECIFICATIONS
For complete specifications
see www.samtec.com?MICD,
see www.samtec.com?SQCD or
see www.samtec.com?6QCD
SQCD Mates with:
QTS, QSS
Socket or
Terminal
6QCD Mates with:
QMS, QFS
Cable:
®
38 AWG Eye Speed™
coax micro ribbon
Signal Routing:
(MICD, SQCD only)
50Ω Single-Ended
Overall Length:
(152mm) 6" to
38 AWG
(1m) 40" standard
Cable Flexing Life:
>40,000 cycles
Eye Speed™
micro ribbon
coax cable
Rated @ -3dB
Insertion Loss
Cable
Cable Bending Radius:
<2,5mm
Length
MICD
Plating:
6" (152,4mm) 1.64 GHz / 3.28 Gbps
12" (304,8mm) 1.22 GHz / 2.44 Gbps
19.68" (0,5m) 760 MHz / 1.52 Gbps
Au over 50µ" (1,27µm) Ni
Current Rating:
300 millamp max
Propagation Delay:
4.5 nsec/meter
Surface Mount or
Edge Mount
39.37" (1m)
458 MHz / 916 Mbps
Operating Temp Range:
-25°C to +105°C
RoHS Compliant:
Yes
NO. POSITIONS
APPLICATIONS
TYPE
WIRE LENGTH
PER ROW
(12,70)
.500
–“XX.XX”
–019, –038, –057, –076
= Wire Length in Inches
(95,3mm) 03.75" Minimum.
(MICD)
MICD
(16,56)
.652
= Mates with MIS/MIT
(9,28)
.365
–025, –050, –075, –100
(SQCD)
SQCD
= Mates with QTS/QSS
Processing conditions will
affect mated height.
–026, –052, –078, –104
(6QCD)
6QCD
= Mates with QMS/QFS
OAL = Wire Length + L
Wire Length (1,27) .050
L
END TO END
MICD SQCD 6QCD
Surface Mount to
Surface Mount
(27,98)
1.101
(28,47)
1.121
(24,13)
.950
Surface Mount to
Edge Mount (Terminal)
Surface Mount to
Edge Mount (Socket)
Edge Mount (Terminal) to
Edge Mount (Terminal)
Edge Mount (Terminal) to
Edge Mount (Socket)
Edge Mount (Socket) to
Edge Mount (Socket)
(27,09)
1.067
(24,15) (21,21)
.951 .835
Note:
(25,70)
1.012
(23,51) (20,48)
.926 .806
Cable lengths longer than
40.00" (1 meter) are not
supported with S.I. test data.
(20,32) (18,29)
.800 .720
N/A
N/A
N/A
Note:
(19,69) (17,55)
.775 .691
Verify part number and correct
wiring scheme with Samtec’s
Interactive Cable Builder at
www.samtec.com/cable_
builder/pitch.asp
(19,05) (16,81)
.750
.662
Note:
END NO. 1
(-STR SHOWN)
END NO. 2
(-TTR SHOWN)
This Series is non-standard,
non-returnable.
WWW.SAMTEC.COM