MINIATURE FUSEHOLDERS
Specifications
PC Mount, Shocksafe
Holder / No. 652
Standard
IEC 60127-6
UL 512
Not for new designs - refer to No. 852 and 853
5x20mm Fuses
∅ 12,3
CSA C22.2. No.39
Fuse carrier inserted
No. 653
Approvals
VDE: License No. 92599
SEMKO: Certificate Nos. 9533178/9635055
UL Recognized: File No. E 70164
CSA Certified: File No. 47574
Mounting
(2) Solder pins 0.5mm x 1.1mm
Printed circuit board
0,5
Vertical / 2-Pin
Protection Class & Category
IP 40 (with Cap 653 07 & 655 07 acc. to IEC 60529)
IP 54 (with Cap 653 04 & 655 04 acc. to IEC 60529)
PC2 (IEC 60127-6)
10
10 + 0,1
Materials
Holder/Cap:
Black Thermoplastic
Holes in the printed circuit board: 1,3 + 0,1
Polyamide PA 6.6, UL94 V-0
Sealing Washer: Silicon (Cap 653 04 & 655 04)
Cap / No. 653
Metal Parts:
Copper alloy,
corrosion protected
Solderable, tinned
Terminals:
Electrical Data (23ºC)
Rated Voltage: 250V
1
Rated Current: 6.3A (VDE/SEMKO)
16A (UL/CSA)
Rated Power: 2.5W (VDE/SEMKO)
16
Operating Temperature
Flush Mount Type
-25ºC to +70ºC (consider de-rating)
Design 07: without silicon washer (IP 40)
Design 04: with silicon washer (IP 54)
between holder and cap
Climatic Test
-25ºC/+70ºC/21 days (IEC 60068-2-1...3)
Stock Conditions
+10ºC to +60ºC
relative humidity ≤ 75% yearly average,
without dew, maximum value for 30 days - 95%
Cap / No. 655
Vibration Resistance
24 cycles at 15 min. each (IEC 60068-2-6)
10 - 60Hz at 0.75mm amplitude
60 - 2000Hz at 10g acceleration
1
Contact Resistance
≤ 5mΩ
20,4
Finger Grip Type
Dielectric Strength
> 1.5 kV
Design 07: without silicon washer (IP 40)
Design 04: with silicon washer (IP 54)
between holder and cap
Impulse Voltage
4 kV, 50 Hz, 1 min., dry
Insulation Resistance
3
> 10 MΩ (500 VDC, 1 min.)
Solderability
235ºC, 3 sec. (Wave)
350ºC, 1 sec. (Soldering Iron)
Order Information
Packaging
Bulk (100 pcs.)
Soldering Heat Resistance
260ºC, 5 sec. (IEC 60068-2-20)
Order Numbers
Holder
No. 652 0000 040
Cap, Flush Mount, IP 40 No. 653 0000 070
Cap, Flush Mount, IP 54 No. 653 0000 040
Cap, Finger Grip, IP 40 No. 655 0000 070
Cap, Finger Grip, IP 54 No. 655 0000 040
Minimum Cross Section
2
Conducting path - 0.2mm
Marking
652, 250V, Approvals
Unit Weight
3.8g (Holder) / 2.0g (653) / 2.4g (655)
Specifications are subject
to change without notice
Note: 1.00 means the number one with two decimal places. 1,000 means the number one thousand.
In our continuing strategy to deliver unparalleled circuit protection solutions,
technical expertise and application leadership, we proudly introduce the
WICKMANN Group and its products to the Littelfuse portfolio.
WebSite www.littelfuse.com
050906
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
