MODEL: 60F
Field Network Modules 60-UNIT Series
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
ANALOG I/O MODULE
(Fuji Electric T-Link use)
/C02: Polyurethane coating
/C03: Rubber coating
Functions & Features
TERMINAL SCREW MATERIAL
/S01: Stainless steel
• Interfacing analog I/O signals from/to 10-RACK or 18-RACK
modules with T-Link
• Saving power and I/O wiring inside an instrumentation
panel
RELATED PRODUCTS
•Special cable (model: MCN34)
72
(2.83)
GENERAL SPECIFICATIONS
Construction: Plug-in
Connection
80 (3.15)
T-Link: Euro type connector terminal (applicable wire size:
0.2 to 2.5 mm , stripped length 7 mm)
2
I/O: 34-pin connector (OMRON XG4A-3434)
Power input: M3.5 screw terminal
153 (6.02)
Screw terminal: Chromated steel (standard) or stainless
steel
mm (inch)
Housing material: Flame-resistant resin (black)
Isolation: I/O to T-Link to power to FG1
Power indicator: Green LED turns on with power supplied.
MODEL: 60F-16[1]-[2][3]
T-Link SPECIFICATIONS
Configuration: Multi-drop
ORDERING INFORMATION
• Code number: 60F-16[1]-[2][3]
Specify a code from below for each [1] through [3].
(e.g. 60F-161-K/Q)
Communication: Half-duplex
Baud rate: 500 kbps
Transmission media/distance:
• Specify the specification for option code /Q
(e.g. /C01/S01)
KPEV-SB 0.75 mm
2
× 1 pair, 700 m
× 1 pair, 1000 m
T-KPEV-SB, 1.25 mm
2
Station No.: Rotary switch; 00 - 99
NO. OF CHANNELS
16: 16 points
(Factory default setting: 00)
L RUN indicator: Red LED ON at normal communication
L ERR. indicator: Red LED ON/blinking at communication
abnormality
[1] I/O TYPE
1: Input
L I/O indicator: Red LED blinking at normal I/O
L COM indicator: RED LED blinking at T-Link normal
communication
2: Output
■ NUMBER OF CONNECTABLE UNITS WITH T-Link
Up to a maximum of 32 T-Link devices can be connected in
a single T-Link system. There is a limit of 100 words in
processor memory. Make sure that the configured word
area to be occupied does not exceed the 100-word range.
(According to the Fuji Electric MICREX-F Users Manual)
It is necessary to consider these criteria when connecting to
this device.
[2] POWER INPUT
AC Power
K: 85 – 132 V AC
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
The below describes the number of words occupied per
device by number of modules.
[3] OPTIONS
• For input 16 / output 16 modules: 16
blank: none
/Q: With options (specify the specification)
60F SPECIFICATIONS
ES-6610 Rev.3 Page 1/4
http://www.m-system.co.jp/