HD-6402
®
Data Sheet
October 31, 2005
FN2956.3
CMOS Universal Asynchronous
Receiver Transmitter (UART)
Features
• 8.0MHz Operating Frequency (5962-9052502)
• 2.0MHz Operating Frequency (HD3-6402R)
• Low Power CMOS Design
The HD-6402 is a CMOS UART for interfacing computers or
microprocessors to an asynchronous serial data channel.
The receiver converts serial start, data, parity and stop bits.
The transmitter converts parallel data into serial form and
automatically adds start, parity and stop bits. The data word
length can be 5, 6, 7 or 8 bits. Parity may be odd or even.
Parity checking and generation can be inhibited. The stop
bits may be one or two or one and one-half when
transmitting 5-bit code.
• Programmable Word Length, Stop Bits and Parity
• Automatic Data Formatting and Status Generation
• Compatible with Industry Standard UARTs
• Single +5V Power Supply
• CMOS/TTL Compatible Inputs
The HD-6402 can be used in a wide range of applications
including modems, printers, peripherals and remote data
acquisition systems. Utilizing the Intersil advanced scaled
SAJI IV CMOS process permits operation clock frequencies
up to 8.0MHz (500K Baud). Power requirements, by
comparison, are reduced from 300mW to 10mW. Status
logic increases flexibility and simplifies the user interface.
• Pb-Free Plus Anneal Available (RoHS Compliant)
Ordering Information
PKG.
TEMP
2MHz = 125K 8MHz = 500K DWG.
PACKAGE RANGE (°C)
PDIP
BAUD
BAUD
#
-40 to +85 HD3-6402R-9
E40.6
PDIP*
-40 to +85 HD3-6402R-9Z
(Note)
-55 to +125
E40.6
Pinout
(Pb-free)
HD-6402 (PDIP, CERDIP)
CERDIP -
SMD#
5962-
9052502MQA
F40.6
TOP VIEW
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
*Pb-free PDIPs can be used for through hole wave solder processing
only. They are not intended for use in Reflow solder processing
applications.
V
1
2
3
4
5
6
7
8
9
40 TRC
39 EPE
38 CLS1
37 CLS2
36 SBS
35 PI
CC
NC
GND
RRD
RBR8
RBR7
RBR6
RBR5
RBR4
34 CRL
33 TBR8
32 TBR7
31 TBR6
30 TBR5
29 TBR4
28 TBR3
27 TBR2
26 TBR1
25 TRO
24 TRE
23 TBRL
22 TBRE
21 MR
RBR3 10
RBR2 11
RBR1 12
PE 13
FE 14
OE 15
SFD 16
RRC 17
DRR 18
DR 19
RRI 20
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2005. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.