www.hamlin.com
55075 Geartooth Hall Effect Sensor Features and Benefits
Features
Benefits
Applications
• Rotary position geartooth sensor
• Stainless steel M12 threaded barrel
• Electronic protection against severe and
automotive environments
• Long life; up to 20 billion operations
• High speed operation
• Geartooth sensor
• Camshaft sensor
• Linear encoder
• Rotary encoder
• No chopper delay
• Unaffected by harsh environments
• Rotary orientation not critical
• On-chip 10 bit A/D converter
• Customer selection of cable length and
connector type
• Self adjusting magnetic range
• 3 wire (voltage output)
• EMC protection (consult Hamlin)
• Short circuit/reverse voltage protection
• Zero speed detection
DIMENSIONS (in) mm
BLOCK DIAGRAM
SPECIFICATIONS
Hall Type
Digital Switch
3 Wire (Voltage Output)
Maximum
Supply
Vdc
Vdc
-25 to +25.2
Voltage
Operation
4.75 to 25.2
(Note 1)
Overvoltage Protection
Vdc-max
Vdc-min
Vdc-max
mA-max
mA-min
mA-max
kHz-max
27
Output HighVoltage
Output LowVoltage
VDD - 2 (sinking outputs with internal pull-up resistor)
0.6 @ 20mA
Output Current (continuously on)
20
1
Current Consumption
10.5
Switching Speed
15
O
Operating
Storage
C
-40 to +85
-65 to +85
Temperature
O
C
Note 1 - As long as Tj (Junction Temperature) is not exceeded
APPLICATION EXAMPLE - Geartooth Sensor
CUSTOMER OPTIONS - Cable Length andTermination
TABLE 1
TABLE 2
Termination Options:-
Cable Length Options:-
(CableType 24 AWG
7/32 PVC 105oC,
SELECT
OPTION
DESCRIPTION
Double Insulated)
A
B
Tinned leads
SELECT
OPTION
CABLE
LENGTH
(in) mm
(.059") 1.5mm Typical
Typical Output
Crimped terminals
6.35mm fastons
01
02
03
04
05
(3.94) 100
(11.81) 300
(19.69) 500
(29.53) 750
(39.37) 1000
C
D
E
AMP MTE 2.54mm pitch
JST XHP 2.5mm pitch
ORDERING INFORMATION
55075
00
XX
X
Series 55075
Table 1
Table 2
Cable Length
Termination
INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION
PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY
PARTICULAR PURPOSE. Product performance may be affected by the application to which the
product is put. Upon request, HAMLIN will assist purchasers by providing information specific
to any particular application. HAMLIN disclaims any and all liability whatsoever for any
purchaser’s reliance upon the information contained on this data sheet without further
consultation with authorised representatives of HAMLIN.
Hamlin USA
Hamlin UK
Tel: +1 920 648 3000 • Fax: +1 920 648 3001 • Email: sales.us@hamlin.com
Tel: +44 (0)1379 649700 • Fax: +44 (0)1379 649702 • Email: sales.uk@hamlin.com
Hamlin Germany Tel: +49 (0) 6142 923920 • Fax: +49 (0) 6142 923921 • Email: sales.de@hamlin.com
Hamectrol France Tel: +33(0) 1 6047 3000 • Fax: +33(0) 1 6015 9136 • Email: sales.fr@hamlin.com
Issue No: AF Date: 05.02.09 DCR B6092