May 1992
54LS161A/DM54LS161A/DM74LS161A,
54LS163A/DM54LS163A/DM74LS163A
Synchronous 4-Bit Binary Counters
General Description
These synchronous, presettable counters feature an inter-
nal carry look-ahead for application in high-speed counting
designs. The LS161A and LS163A are 4-bit binary counters.
The carry output is decoded by means of a NOR gate, thus
preventing spikes during the normal counting mode of oper-
ation. Synchronous operation is provided by having all flip-
flops clocked simultaneously so that the outputs change co-
incident with each other when so instructed by the count-
enable inputs and internal gating. This mode of operation
eliminates the output counting spikes which are normally
associated with asynchronous (ripple clock) counters. A
buffered clock input triggers the four flip-flops on the rising
(positive-going) edge of the clock input waveform.
gating. Instrumental in accomplishing this function are two
count-enable inputs and a ripple carry output.
Both count-enable inputs (P and T) must be high to count,
and input T is fed forward to enable the ripple carry output.
The ripple carry output thus enabled will produce a high-lev-
el output pulse with a duration approximately equal to the
high-level portion of the Q output. This high-level overflow
A
ripple carry pulse can be used to enable successive cascad-
ed stages. High-to-low level transitions at the enable P or T
inputs may occur, regardless of the logic level of the clock.
These counters feature a fully independent clock circuit.
Changes made to control inputs (enable P or T or load) that
will modify the operating mode have no effect until clocking
occurs. The function of the counter (whether enabled, dis-
abled, loading, or counting) will be dictated solely by the
conditions meeting the stable set-up and hold times.
These counters are fully programmable; that is, the outputs
may be preset to either level. As presetting is synchronous,
setting up a low level at the load input disables the counter
and causes the outputs to agree with the setup data after
the next clock pulse, regardless of the levels of the enable
input. The clear function for the LS161A is asynchronous;
and a low level at the clear input sets all four of the flip-flop
outputs low, regardless of the levels of clock, load, or en-
able inputs. The clear function for the LS163A is synchro-
nous; and a low level at the clear inputs sets all four of the
flip-flop outputs low after the next clock pulse, regardless of
the levels of the enable inputs. This synchronous clear al-
lows the count length to be modified easily, as decoding the
maximum count desired can be accomplished with one ex-
ternal NAND gate. The gate output is connected to the clear
input to synchronously clear the counter to all low outputs.
Features
Y
Synchronously programmable
Y
Internal look-ahead for fast counting
Y
Carry output for n-bit cascading
Y
Synchronous counting
Y
Load control line
Y
Diode-clamped inputs
Y
Typical propagation time, clock to Q output 14 ns
Y
Typical clock frequency 32 MHz
Y
Typical power dissipation 93 mW
Y
Alternate
Military/Aerospace
device
(54LS161,
The carry look-ahead circuitry provides for cascading coun-
ters for n-bit synchronous applications without additional
54LS163) is available. Contact a National Semiconduc-
tor Sales Office/Distributor for specificaitons.
Connection Diagram
Dual-In-Line Package
Order Numbers 54LS161ADMQB, 54LS161AFMQB,
54LS161ALMQB, 54LS163ADMQB, 54LS163AFMQB,
54LS163ALMQB, DM54LS161AJ, DM54LS161AW,
DM54LS163AJ, DM54LS163AW, DM74LS161AM,
DM74LS161AN, DM74LS163AM or DM74LS163AN
See NS Package Number E20A, J16A,
M16A, N16E or W16A
TL/F/6397–1
C
1995 National Semiconductor Corporation
TL/F/6397
RRD-B30M105/Printed in U. S. A.
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
