July 1998
54ABT377
Octal D-Type Flip-Flop with Clock Enable
n Eight edge-triggered D flip-flops
n Buffered common clock
n See ’ABT273 for master reset version
n See ’ABT373 for transparent latch version
n See ’ABT374 for TRI-STATE® version
General Description
The ’ABT377 has eight edge-triggered, D-type flip-flops with
individual D inputs and Q outputs. The common buffered
Clock (CP) input loads all flip-flops simultaneously, when the
Clock Enable (CE) is LOW.
n Output sink capability of 48 mA, source capability of
24 mA
n Guaranteed latchup protection
n High impedance glitch free bus loading during entire
power up and power down cycle
The register is fully edge-triggered. The state of each D in-
put, one setup time before the LOW-to-HIGH clock transi-
tion, is transferred to the corresponding flip-flop’s Q output.
The CE input must be stable only one setup time prior to the
LOW-to-HIGH clock transition for predictable operation.
n Non-destructive hot insertion capability
n Disable time less than enable time to avoid bus
contention
Features
n Clock enable for address and data synchronization
n Standard Microcircuit Drawing (SMD) 5962-9314801
applications
Ordering Code:
Military
Package
Number
Package Description
54ABT377J-QML
J20A
20-Lead Ceramic Dual-In-Line
20-Lead Cerpack
54ABT377W-QML
54ABT377E-QML
W20A
E20A
20-Lead Ceramic Leadless Chip Carrier, Type C
Connection Diagram
Pin Assignment for LCC
Pin Assignment for
DIP and Cerpack
DS100216-11
Pin
Description
Names
DS100216-1
D0–D7 Data Inputs
CE
CP
Clock Enable (Active LOW)
Clock Pulse Input
Q0–Q7 Data Outputs
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 1998 National Semiconductor Corporation
DS100216
www.national.com