CommercialVehicle Product Datasheet
FlexMod™ SMART BATTERY ISOLATOR CONTROLLER
Specifications Overview
Voltage Rating:
12-24V DC (Auto Ranging)
Humidity:
0 to 90%RH
10-500Hz
Vibration:
Operating Temp:
Ingress Protection:
Dimensions:
-40° to +85°C
IP67
4.0” x 2.70” x 1.31”
Web Resources
Download technical resources at:
littelfuse.com/FlexMod
Description
Preserves starting battery voltage by isolating the auxiliary
battery when system voltage drops. For vehicles with two
batteries (or banks of batteries). Turns any electromechanical
solenoid or relay into a Smart Isolator.
Ordering Information
PART NUMBERS
HARNESS
INCLUDED
Features and Benefits
DESCRIPTION
BULK
48540
–
BOXED
48540-BX
48540-01-BX
–
• Isolates main and auxiliary batteries when system voltage
drops below 12.7V, and automatically reconnects battery
banks at 13.2V. Preserves starting power; eliminates
downtime and jump starts due to dead batteries.
Unit Only
No
Yes
No
Unit & Harness
• Start assist feature provides boost to starting battery,
when needed.
48740
–
Dealer-programmable unit
48740-01-BX Dealer-programmable unit w/ Harness
Yes
• Compatible with modern electronically controlled
alternators (some diode Battery Isolators are not). Smart
Battery Isolator Controller eliminates false battery
warnings created by diode isolators.
Accessories
• Status light output drives remote light, informing operator
when banks are connected.
PART NUMBERS
DESCRIPTION
12805
FlexMod Harness
• Auto-ranging to automatically sense the voltage of the
system (12 or 24V) and selects the presets appropriate to
that voltage.
FlexMod™ Dimensions
• Waterproof, dustproof and vibration-proof. Sealed to IP67
so it can mount on a vehicle even in places where road-
splash is a problem.
• Ultra low 1mA standby current means minimal battery
drain – especially valuable when vehicle is in storage or not
in use.
• Factory programmable unit is highly versatile: with a broad
range of presets available to match any special application.
• Rated for more than 1,000,000 on-off cycles – unit
operates for the lifetime of the vehicle. Solid state
technology gives long life and low maintenance.
• Compact design (4 x 3 x 1”) – Uses less space; mounts
outside or inside. Saves money by eliminating other
hardware, and provides better wire routing.
Datasheet Replaces Hotfeed Number D-632
1 of 4
littelfuse.com
© 2017 Littelfuse Commercial Vehicle Products
Rev: 053117