Type 461M
Metallized Polyester Film Capacitors
Type 461M
Axial Lead
Pressed/Oval Profile
Metallized Polyester
Film Capacitors
Specifications
Insulation Resistance:
Capacitance Range:
At +25ºC:
10,000 MΩ for C < 1.0 µF
0.027 to 100.0 µF
10,000 MΩ-µF for C > 1.0 µF
1,000 MΩ for C < 1.0 µF
1,000 MΩ-µF for C > 1.0 µF
At +85ºC:
Capacitance Tolerance:
+5% and +10%, standard
(other tolerances available
upon request)
Encapsulation:
Wrapped with flame retardant polyester
tape (meets UL510 specifications) and
potted with flame retardant epoxy (meets
UL94V-0 specifications).
Voltage Ratings:
63 to 400 VDC
Lead Wire:
Operating Temperature:
Units may be operated at full-rated
voltage from -55ºC to +85ºC.
Tinned copper-clad steel for wire sizes:
0.020 (0.5) diameter (#24 AWG)
0.025 (0.6) diameter (#22 AWG)
0.032 (0.8) diameter (#20 AWG)
Voltage De-rating above +85ºC:
Units may be operated up to a
Tinned copper for wire sizes:
0.040 (1.0) diameter (#18 AWG)
maximum of 125ºC provided the
voltage is de-rated linearly to 50%
of rated voltage of +125ºC.
Dielectric/Construction:
Metallized polyester film, single section
design. Non-inductively wound.
Dissipation Factor:
1.0% maximum @ 1 KHz, +25ºC
In addition to the information provided here, CDE also offers complete design and
manufacturing of specific capacitance values, custom form factors, special lead terminations, etc.
Dimensions are in inches, millimeters are in parenthesis.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830