Type 460M
Metallized Polyester Film Capacitors
Type 460M
Axial Lead
Round Profile
Metallized Polyester
Film Capacitors
Specifications
Capacitance Range
0.022 to 100.0 µF
+5% and +10%, standard (other tolerances available)
63 to 400 VDC 40 to 200 VAC
Capacitance Tolerance
Rated Voltage
Units may be operated at full-rated voltage from -55 ºC to +85 ºC
Operating Temperature Range
Voltage De-rating above +85 ºC
Units may be operated up to a maximum of 125ºC provided the voltage is
de-rated linearly to 50% of rated voltage of +125ºC
Dissipation Factor
1.0% maximum @ 1 KHz, +25ºC
At +25 ºC: 10,000 MΩ for C < 1.0 µF
10,000 MΩ-µF for C > 1.0 µF
Insulation Resistance
At +85ºC: 1,000 MΩ for C < 1.0 µF
1,000 MΩ-µF for C > 1.0 µF
Wrapped with flame retardant polyester tape (meets UL510 specifications)
and potted with flame retardant epoxy (meets UL94V-0 specifications)
Encapsulation
Lead Wire
Tinned copper-clad steel for wire sizes:
0.020 (0.5) diameter (#24 AWG) 0.025
(0.6) diameter (#22 AWG) 0.032 (0.8)
diameter (#20 AWG)
Tinned copper for wire sizes:
0.040 (1.0) diameter (#18 AWG)
Metallized polyester film, single section design. Non-inductively wound
Dielectric/Construction
In addition to the information provided here, CDE also offers complete design and
manufacturing of specific capacitance values, custom form factors, special lead
terminations, etc.
Dimensions are in inches, millimeters are in parenthesis.
Regulatory Information
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830