Features
nꢀ Markingꢀonꢀcontrastingꢀbackgroundꢀforꢀꢀ
permanentꢀidentification
nꢀ RoHSꢀcompliant*
ꢀ
nꢀ LowꢀprofileꢀisꢀcompatibleꢀwithꢀDIPs
nꢀ Wideꢀassortmentꢀofꢀpinꢀpackagesꢀenhancesꢀ
ꢀ
designꢀflexibility
nꢀ Ammo-pakꢀpackagingꢀavailable
nꢀ Recommendedꢀforꢀrosinꢀfluxꢀandꢀsolventꢀꢀ
ꢀ
cleanꢀorꢀnoꢀcleanꢀfluxꢀprocesses
4600X Series - Thick Film Conformal SIPs
Package Power Temp. Derating Curve
Product Characteristics
Product Dimensions
Resistance Range
5.08
(.200)
MAX.
.................... 10 ohms to 10 megohms
Maximum Operating Voltage.........100 V
Temperature Coefficient of Resistance
50 Ω to 2.2 megohms.....±100 ppm/°C
below 50 Ω.....................±250 ppm/°C
above 2.2 megohms.......±250 ppm/°C
TCR Tracking.........................50 ppm/°C
maximum; equal values
A
MAXIMUM
3.50
3.00
2.50
PINꢀ#1
REF.
MAX. 1.24
3.3ꢀ+0.5/-0.3
(.130ꢀ+.020/ꢀ-.012)
BOTHꢀENDS (.049)
0.50ꢀ±ꢀ0.10
(.020ꢀ±ꢀ.004)
2.00
TYP.
4614X
4612X
4610X
4608X
4606X
4604X
Resistor Tolerance............... See circuits
Insulation Resistance
2.54ꢀ±ꢀ.07
1.50
(.100ꢀ±ꢀ.003*)
................ 10,000 megohms minimum
Dielectric Withstanding Voltage
...........................................200 VRMS
Operating Temperature
TYP.
Pin
A Maximum
Count mm (Inches)
NON-ACCUM.
1.00
4
5
10.11 (.398)
12.65 (.498)
15.19 (.598)
17.73 (.698)
20.27 (.798)
22.81 (.898)
25.35 (.998)
27.89 (1.098)
30.43 (1.198)
32.97 (1.298)
35.51 (1.398)
6
.50
2.49
(.098)
................................-55 °C to +125 °C
7
MAX.
8
9
Environmental Characteristics
0
25
70
AMBIENT TEMPERATURE ( C )
125
10
11
12
13
14
ϒ
TESTS PER MIL-STD-202...... ∆R MAX.
Short Time Overload..................±0.25 %
Load Life....................................±1.00 %
Moisture Resistance..................±0.50 %
Resistance to Soldering Heat
...............................................±0.50 %
Terminal Strength ......................±0.25 %
Thermal Shock ..........................±0.25 %
.254ꢀ±ꢀ.050
(.010ꢀ±ꢀ.002)
MAX.
Package Power Ratings (Watts)
Ambient
Temp.
70 °C
Ambient
Temp.
70 °C
Maximumꢀpackageꢀlengthꢀisꢀequalꢀtoꢀꢀ2.54mmꢀ(.100")ꢀtimesꢀtheꢀ
numberꢀofꢀpins,ꢀlessꢀ.005mmꢀ(.002").
Pkg.
Pkg.
Governingꢀdimensionsꢀareꢀinꢀmetric.ꢀDimensionsꢀinꢀparenthesesꢀ
areꢀinchesꢀandꢀareꢀapproximate.
4604X
4605X
4606X
4607X
4608X
4609X
0.50
0.63
0.75
0.88
1.00
1.13
4610X
4611X
4612X
4613X
4614X
1.25
1.38
1.50
1.63
1.75
Physical Characteristics
ꢀ*Terminalꢀcenterlineꢀtoꢀcenterlineꢀmeasurementsꢀmadeꢀatꢀpointꢀof
emergenceꢀofꢀtheꢀleadꢀfromꢀtheꢀbody.
Flammability ........ Conforms to UL94V-0
Body Material.......................Epoxy resin
Standard Packaging
For Standard Values Used in
Capacitors, Inductors, and Resistors,
click here.
.................. Bulk, Ammo-pak available
How To Order
Typical Part Marking
Represents total content. Layout may
vary.
46 06 X - 101 - 222 __ LF
Model
(46 = Conformal
SIP)
Number of Pins
Physical Configuration
(X = Thick Film Low Profile)
Part Number
Marking
4606X-101-RC
4608X-102-RC
4610X-104-RC/RC
6X-1-RC
8X-2-RC
10X-4-RC/RC
Electrical Configuration
• 101 = Bussed
RC = ohmic value, 3-digit resistance
code.
• 102 = Isolated
• 104 = Dual Terminator
• AP1 = Bussed Ammo**
• AP2 = Isolated Ammo**
• AP4 = Dual Ammo**
CIRCUIT
NUMBERꢀOFꢀPINS
RESISTANCE
CODE
6X-2-222
YYWW
Resistance Code
DATEꢀCODE
• First 2 digits are significant
• Third digit represents the
number of zeros to follow.
PINꢀONE
INDICATOR
MANUFACTURER'S
TRADEMARK
Resistance Tolerance
• Blank = ±2 % (see “Resistance Tolerance”
on next page for resistance range)
• F = ±1 % (100 ohms - 5 megohms)
Terminations
• All electrical configurations EXCEPT 104 & AP4:
LF = Sn/Ag/Cu-plated (RoHS compliant)
• ONLY electrical configurations 104 & AP4:
L = Sn/Ag/Cu-plated (RoHS compliant)
Consult factory for other available options.
**Available for packages with 10 pins or less.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*RoHSꢀDirectiveꢀ2015/863,ꢀMarꢀ31,ꢀ2015ꢀandꢀAnnex.ꢀ
Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Usersꢀshouldꢀverifyꢀactualꢀdeviceꢀperformanceꢀinꢀtheirꢀspecificꢀapplications.ꢀ
Theꢀproductsꢀdescribedꢀhereinꢀandꢀthisꢀdocumentꢀareꢀsubjectꢀtoꢀspecificꢀlegalꢀdisclaimersꢀasꢀsetꢀforthꢀonꢀtheꢀlastꢀpageꢀofꢀ
thisꢀdocument,ꢀandꢀatꢀwww.bourns.com/docs/legal/disclaimer.pdf.