Document 450-1
RFID Transponder Coil
–
4513TC
The 4513TC is Coilcraft’s best performing transponder
coil designed for RFID applications at 125 kHz. It offers
better sensitivity, greater read distance and higher SRF
than other coils its size.
The coil is wound on a plastic base, providing great dura-
bility and allowing this part to withstand harsh mechanical
shock.With operating temperature range to 125°C, these
coils are ideal for a wide range of applications.
In addition to our standard models, Coilcraft can design
transponder coils to operate at other frequencies.
To request free evaluation samples, contact Coilcraft or
visit www.coilcraft.com.
Inductance2
at125kHz
2ꢀꢁmHꢂ
Read
Matching
distance3
ꢁinches/cmꢂ
Sensitivity4
ꢁmV/µTꢂ
capacitor5
ꢁpFꢂ
DCRmax6
ꢁOhmsꢂ
SRFtyp7
ꢁkHzꢂ
Partnumber1
Qmin2
4513TC-404XGL_
4513TC-105XGL_
4513TC-245XGL_
4513TC-495XGL_
4513TC-725XGL_
0.40
1.00
2.38
4.90
7.20
29
33
40
44
51
23.90/60,71
30.95/78,61
36.75/93,35
38.55/97,92
44.10/112,01
11.76
19.80
32.80
54.76
76.97
4050
1621
681
331
225
9.66
20.6
39.0
55.8
91.0
5890
3670
2200
1551
1400
1. When ordering, please specify packaging code:
4513TC-725XGLD
Terminations RoHS compliant gold over nickel over phos bronze.
Weight 280 – 335 mg
Ambient temperature –40°C to +125°C
Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic
tape (2500 parts per full reel).
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter D instead.
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
2. Inductance and Q measured using Agilent/HP 4192A impedance
analyzer at 125 kHz. For recommended test procedures, contact
Coilcraft.
Moisture Sensitivity Level ꢁMSLꢂ 1 (unlimited floor life at <30°C /
85% relative humidity)
3. Read distance measured using the KEELOQ® Transponder Evaluation
Kit part number DM303005 from Microchip. Distance was recorded as
the voltage across the resonant circuit dropped below 10 mV.
4. Sensitivity measured in accordance with Coilcraft application note
“Measuring Sensitivity of Transponder Coils.”
5. Matching capacitor value required for parallel resonant circuit operating
at 125 kHz.
6. DCR measured on micro-ohmmeter.
Temperature coefficient of inductance +50 to +210 ppm/°C
Failures in Time ꢁFITꢂ / Mean Time Between Failures ꢁMTBFꢂ
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2500 per 13″ reel Plastic tape: 24 mm wide,
0.35 mm thick, 8 mm pocket spacing, 2.75 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
7. SRF measured using Agilent/HP 8753D network analyzer.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 450-1 Revised 10/29/08
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.